Cucumber Reports (no 3223) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3223	05 Jan 2024, 12:16

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:55.270	Passed

Tags: @product @not_release_blocker

37.595

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.394

And I temporarily create a 4 GiB disk named "gptfat" 0.062

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.054

And I plug USB drive "gptfat" 2.438

When I start Tails Installer 21.601

Then I am told by Tails Installer that the destination device "is too small" 0.044

Hooks

After features/support/hooks.rb:291 1.128

After features/support/hooks.rb:75 0.001

Tags: @product

37.063

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.089

And I temporarily create a 7200 MiB disk named "temp" 0.052

And I start Tails Installer 25.728

But a suitable USB device is not found 0.024

When I plug USB drive "temp" 2.842

Then the "temp" USB drive is selected 0.087

When I unplug USB drive "temp" 0.219

Then a suitable USB device is not found 0.017

Hooks

After features/support/hooks.rb:291 0.716

After features/support/hooks.rb:75 0.000

Tags: @product

4:3.062

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.218

And I temporarily create a 7200 MiB disk named "install" 0.078

And I create a gpt partition with a vfat filesystem on disk "install" 5.195

And I plug USB drive "install" 2.457

And I install Tails to USB drive "install" by cloning 3:35.566

Then the running Tails is installed on USB drive "install" 11.472

But there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.175

After features/support/hooks.rb:75 0.102

Tags: @product

3:52.974

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.439

And I temporarily create a 7200 MiB disk named "install" 0.050

And I plug USB drive "install" 2.518

And I install Tails to USB drive "install" by cloning 3:29.768

Then the running Tails is installed on USB drive "install" 12.103

But there is no persistence partition on USB drive "install" 0.093

Hooks

After features/support/hooks.rb:291 1.203

After features/support/hooks.rb:75 0.117

Tags: @product

4:19.271

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.176

And I create a file in the Persistent directory 0.093

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 4.259

And I plug USB drive "install" 2.520

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.665

Then the running Tails is installed on USB drive "install" 13.923

And there is a persistence partition on USB drive "install" 0.067

And the USB drive "install" contains the same files as my persistent storage 3.514

Hooks

After features/support/hooks.rb:291 1.578

After features/support/hooks.rb:75 0.117

Tags: @product

4:1.384

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.419

And I temporarily create a 7200 MiB disk named "install" 0.056

And I plug USB drive "install" 2.501

And I install Tails to USB drive "install" by cloning 3:33.196

Then the running Tails is installed on USB drive "install" 14.125

And there is no persistence partition on USB drive "install" 0.084

Hooks

After features/support/hooks.rb:291 1.613

After features/support/hooks.rb:75 0.092

Tags: @product

4:4.025

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.448

And I have started Tails from DVD without network and logged in 8.589

And I clone USB drive "__internal" to a temporary USB drive "install" 1.084

And I plug USB drive "install" 2.403

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:30.978

Then the running Tails is installed on USB drive "install" 11.461

And there is no persistence partition on USB drive "install" 0.058

Hooks

After features/support/hooks.rb:291 1.190

After features/support/hooks.rb:75 0.123

Tags: @product @uefi

1:32.399

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 9.995

And I power off the computer 0.320

And the computer is set to boot in UEFI mode 0.024

When I start Tails from USB drive "__internal" with network unplugged and I login 1:17.836

Then Tails is running from USB drive "__internal" 0.405

And the boot device has safe access rights 3.760

And Tails has started in UEFI mode 0.056

Hooks

After features/support/hooks.rb:291 0.739

After features/support/hooks.rb:75 0.005

Tags: @product

1:36.924

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.219

And I plug and mount a USB drive containing a Tails USB image 29.375

And I create a 7200 MiB disk named "usbimage" 0.045

And I plug USB drive "usbimage" 2.437

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 56.846

Hooks

After features/support/hooks.rb:291 3.175

After features/support/hooks.rb:75 0.103

Tags: @product

1:10.567

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given a computer 0.180

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:9.005

Then Tails is running from USB drive "usbimage" 0.422

And the label of the system partition on "usbimage" is "Tails" 0.194

And the system partition on "usbimage" is an EFI system partition 0.228

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.193

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.134

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.097

And the system partition on "usbimage" has the expected flags 0.111

Hooks

After features/support/hooks.rb:291 0.737

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:55.270	Passed

Feature Report