Cucumber Reports (no 3240) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3240	17 Jan 2024, 12:37

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:39.023	Passed

Tags: @product @not_release_blocker

37.667

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.227

And I temporarily create a 4 GiB disk named "gptfat" 0.033

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.017

And I plug USB drive "gptfat" 2.447

When I start Tails Installer 21.893

Then I am told by Tails Installer that the destination device "is too small" 0.048

Hooks

After features/support/hooks.rb:291 0.869

After features/support/hooks.rb:75 0.001

Tags: @product

33.273

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.628

And I temporarily create a 7200 MiB disk named "temp" 0.026

And I start Tails Installer 21.551

But a suitable USB device is not found 0.022

When I plug USB drive "temp" 2.730

Then the "temp" USB drive is selected 0.107

When I unplug USB drive "temp" 0.186

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:291 0.706

After features/support/hooks.rb:75 0.000

Tags: @product

3:54.929

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.213

And I temporarily create a 7200 MiB disk named "install" 0.027

And I create a gpt partition with a vfat filesystem on disk "install" 4.042

And I plug USB drive "install" 2.401

And I install Tails to USB drive "install" by cloning 3:28.962

Then the running Tails is installed on USB drive "install" 11.175

But there is no persistence partition on USB drive "install" 0.106

Hooks

After features/support/hooks.rb:291 1.027

After features/support/hooks.rb:75 0.107

Tags: @product

3:51.101

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.523

And I temporarily create a 7200 MiB disk named "install" 0.029

And I plug USB drive "install" 2.435

And I install Tails to USB drive "install" by cloning 3:28.704

Then the running Tails is installed on USB drive "install" 11.330

But there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.065

After features/support/hooks.rb:75 0.116

Tags: @product

4:51.041

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.435

And I create a file in the Persistent directory 0.088

And I temporarily create a 7200 MiB disk named "install" 0.035

And I create a gpt partition with a vfat filesystem on disk "install" 4.080

And I plug USB drive "install" 2.456

And I install Tails with Persistent Storage to USB drive "install" by cloning 4:13.312

Then the running Tails is installed on USB drive "install" 15.057

And there is a persistence partition on USB drive "install" 0.073

And the USB drive "install" contains the same files as my persistent storage 4.501

Hooks

After features/support/hooks.rb:291 2.120

After features/support/hooks.rb:75 0.117

Tags: @product

3:57.078

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.796

And I temporarily create a 7200 MiB disk named "install" 0.033

And I plug USB drive "install" 2.426

And I install Tails to USB drive "install" by cloning 3:30.459

Then the running Tails is installed on USB drive "install" 13.283

And there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:291 1.464

After features/support/hooks.rb:75 0.091

Tags: @product

4:1.324

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.041

And I have started Tails from DVD without network and logged in 8.057

And I clone USB drive "__internal" to a temporary USB drive "install" 1.051

And I plug USB drive "install" 2.481

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:29.333

Then the running Tails is installed on USB drive "install" 11.209

And there is no persistence partition on USB drive "install" 0.151

Hooks

After features/support/hooks.rb:291 1.266

After features/support/hooks.rb:75 0.109

Tags: @product @uefi

1:26.663

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.055

And I power off the computer 0.356

And the computer is set to boot in UEFI mode 0.017

When I start Tails from USB drive "__internal" with network unplugged and I login 1:12.485

Then Tails is running from USB drive "__internal" 0.301

And the boot device has safe access rights 3.396

And Tails has started in UEFI mode 0.050

Hooks

After features/support/hooks.rb:291 0.616

After features/support/hooks.rb:75 0.005

Tags: @product

1:14.673

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.099

And I plug and mount a USB drive containing a Tails USB image 25.732

And I create a 7200 MiB disk named "usbimage" 0.021

And I plug USB drive "usbimage" 2.441

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 38.379

Hooks

After features/support/hooks.rb:291 1.259

After features/support/hooks.rb:75 0.085

Tags: @product

1:11.269

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.116

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:9.375

Then Tails is running from USB drive "usbimage" 0.599

And the label of the system partition on "usbimage" is "Tails" 0.312

And the system partition on "usbimage" is an EFI system partition 0.283

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.255

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.133

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.098

And the system partition on "usbimage" has the expected flags 0.094

Hooks

After features/support/hooks.rb:291 0.665

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:39.023	Passed

Feature Report