Cucumber Reports (no 3288) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3288	19 Feb 2024, 15:17

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:8.945	Passed

Tags: @product @not_release_blocker

32.362

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.444

And I temporarily create a 4 GiB disk named "gptfat" 0.023

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.979

And I plug USB drive "gptfat" 2.464

When I start Tails Installer 18.411

Then I am told by Tails Installer that the destination device "is too small" 0.040

Hooks

After features/support/hooks.rb:291 1.070

After features/support/hooks.rb:75 0.001

Tags: @product

27.795

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.630

And I temporarily create a 7200 MiB disk named "temp" 0.028

And I start Tails Installer 16.959

But a suitable USB device is not found 0.023

When I plug USB drive "temp" 2.833

Then the "temp" USB drive is selected 0.078

When I unplug USB drive "temp" 0.211

Then a suitable USB device is not found 0.028

Hooks

After features/support/hooks.rb:291 0.911

After features/support/hooks.rb:75 0.000

Tags: @product

3:55.101

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.909

And I temporarily create a 7200 MiB disk named "install" 0.027

And I create a gpt partition with a vfat filesystem on disk "install" 4.086

And I plug USB drive "install" 2.464

And I install Tails to USB drive "install" by cloning 3:29.701

Then the running Tails is installed on USB drive "install" 10.841

But there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:291 1.694

After features/support/hooks.rb:75 0.113

Tags: @product

3:45.659

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.540

And I temporarily create a 7200 MiB disk named "install" 0.098

And I plug USB drive "install" 2.624

And I install Tails to USB drive "install" by cloning 3:25.022

Then the running Tails is installed on USB drive "install" 10.310

But there is no persistence partition on USB drive "install" 0.062

Hooks

After features/support/hooks.rb:291 1.352

After features/support/hooks.rb:75 0.115

Tags: @product

4:23.258

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.179

And I create a file in the Persistent directory 0.086

And I temporarily create a 7200 MiB disk named "install" 0.031

And I create a gpt partition with a vfat filesystem on disk "install" 4.026

And I plug USB drive "install" 2.569

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:50.192

Then the running Tails is installed on USB drive "install" 12.069

And there is a persistence partition on USB drive "install" 0.063

And the USB drive "install" contains the same files as my persistent storage 3.039

Hooks

After features/support/hooks.rb:291 2.199

After features/support/hooks.rb:75 0.124

Tags: @product

4:0.688

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.157

And I temporarily create a 7200 MiB disk named "install" 0.038

And I plug USB drive "install" 2.541

And I install Tails to USB drive "install" by cloning 3:28.445

Then the running Tails is installed on USB drive "install" 19.401

And there is no persistence partition on USB drive "install" 0.104

Hooks

After features/support/hooks.rb:291 1.903

After features/support/hooks.rb:75 0.114

Tags: @product

4:4.161

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.936

And I have started Tails from DVD without network and logged in 8.516

And I clone USB drive "__internal" to a temporary USB drive "install" 1.261

And I plug USB drive "install" 2.579

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:25.809

Then the running Tails is installed on USB drive "install" 11.997

And there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:291 1.552

After features/support/hooks.rb:75 0.115

Tags: @product @uefi

2:8.929

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 24.267

And I power off the computer 0.330

And the computer is set to boot in UEFI mode 0.023

When I start Tails from USB drive "__internal" with network unplugged and I login 1:40.698

Then Tails is running from USB drive "__internal" 0.484

And the boot device has safe access rights 3.074

And Tails has started in UEFI mode 0.051

Hooks

After features/support/hooks.rb:291 0.599

After features/support/hooks.rb:75 0.006

Tags: @product

1:25.043

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.656

And I plug and mount a USB drive containing a Tails USB image 30.279

And I create a 7200 MiB disk named "usbimage" 0.027

And I plug USB drive "usbimage" 2.436

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 44.644

Hooks

After features/support/hooks.rb:291 1.895

After features/support/hooks.rb:75 0.081

Tags: @product

1:25.944

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.110

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:24.771

Then Tails is running from USB drive "usbimage" 0.310

And the label of the system partition on "usbimage" is "Tails" 0.191

And the system partition on "usbimage" is an EFI system partition 0.180

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.141

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.086

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.075

And the system partition on "usbimage" has the expected flags 0.077

Hooks

After features/support/hooks.rb:291 0.652

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:8.945	Passed

Feature Report