Cucumber Reports (no 3295) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3295	24 Feb 2024, 12:47

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:48.592	Passed

Tags: @product @not_release_blocker

36.309

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.720

And I temporarily create a 4 GiB disk named "gptfat" 0.052

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.099

And I plug USB drive "gptfat" 2.529

When I start Tails Installer 19.864

Then I am told by Tails Installer that the destination device "is too small" 0.044

Hooks

After features/support/hooks.rb:291 0.850

After features/support/hooks.rb:75 0.001

Tags: @product

29.389

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.195

And I temporarily create a 7200 MiB disk named "temp" 0.048

And I start Tails Installer 18.121

But a suitable USB device is not found 0.054

When I plug USB drive "temp" 2.648

Then the "temp" USB drive is selected 0.110

When I unplug USB drive "temp" 0.190

Then a suitable USB device is not found 0.019

Hooks

After features/support/hooks.rb:291 0.771

After features/support/hooks.rb:75 0.000

Tags: @product

3:58.233

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.365

And I temporarily create a 7200 MiB disk named "install" 0.062

And I create a gpt partition with a vfat filesystem on disk "install" 4.165

And I plug USB drive "install" 2.520

And I install Tails to USB drive "install" by cloning 3:26.960

Then the running Tails is installed on USB drive "install" 16.093

But there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:291 1.424

After features/support/hooks.rb:75 0.114

Tags: @product

3:49.310

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.446

And I temporarily create a 7200 MiB disk named "install" 0.051

And I plug USB drive "install" 2.540

And I install Tails to USB drive "install" by cloning 3:26.101

Then the running Tails is installed on USB drive "install" 12.085

But there is no persistence partition on USB drive "install" 0.085

Hooks

After features/support/hooks.rb:291 1.666

After features/support/hooks.rb:75 0.132

Tags: @product

4:29.415

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.712

And I create a file in the Persistent directory 0.072

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 4.141

And I plug USB drive "install" 2.579

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.644

Then the running Tails is installed on USB drive "install" 12.839

And there is a persistence partition on USB drive "install" 0.058

And the USB drive "install" contains the same files as my persistent storage 3.315

Hooks

After features/support/hooks.rb:291 2.041

After features/support/hooks.rb:75 0.125

Tags: @product

3:55.742

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.060

And I temporarily create a 7200 MiB disk named "install" 0.067

And I plug USB drive "install" 2.423

And I install Tails to USB drive "install" by cloning 3:27.700

Then the running Tails is installed on USB drive "install" 13.404

And there is no persistence partition on USB drive "install" 0.085

Hooks

After features/support/hooks.rb:291 1.836

After features/support/hooks.rb:75 0.105

Tags: @product

4:1.466

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.127

And I have started Tails from DVD without network and logged in 8.622

And I clone USB drive "__internal" to a temporary USB drive "install" 1.054

And I plug USB drive "install" 2.560

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:26.225

Then the running Tails is installed on USB drive "install" 12.792

And there is no persistence partition on USB drive "install" 0.083

Hooks

After features/support/hooks.rb:291 1.281

After features/support/hooks.rb:75 0.105

Tags: @product @uefi

1:50.946

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 14.199

And I power off the computer 0.343

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 1:32.974

Then Tails is running from USB drive "__internal" 0.299

And the boot device has safe access rights 3.046

And Tails has started in UEFI mode 0.054

Hooks

After features/support/hooks.rb:291 0.599

After features/support/hooks.rb:75 0.006

Tags: @product

1:45.195

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.340

And I plug and mount a USB drive containing a Tails USB image 30.884

And I create a 7200 MiB disk named "usbimage" 0.049

And I plug USB drive "usbimage" 2.387

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:3.534

Hooks

After features/support/hooks.rb:291 2.081

After features/support/hooks.rb:75 0.098

Tags: @product

1:52.582

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.154

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:51.270

Then Tails is running from USB drive "usbimage" 0.367

And the label of the system partition on "usbimage" is "Tails" 0.210

And the system partition on "usbimage" is an EFI system partition 0.163

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.144

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.090

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.098

And the system partition on "usbimage" has the expected flags 0.082

Hooks

After features/support/hooks.rb:291 0.944

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:48.592	Passed

Feature Report