Cucumber Reports (no 3300) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3300	27 Feb 2024, 21:44

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	31:44.974	Passed

Tags: @product @not_release_blocker

33.813

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.017

And I temporarily create a 4 GiB disk named "gptfat" 0.032

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.003

And I plug USB drive "gptfat" 2.487

When I start Tails Installer 19.213

Then I am told by Tails Installer that the destination device "is too small" 0.058

Hooks

After features/support/hooks.rb:291 0.977

After features/support/hooks.rb:75 0.001

Tags: @product

28.954

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 7.956

And I temporarily create a 7200 MiB disk named "temp" 0.031

And I start Tails Installer 17.950

But a suitable USB device is not found 0.022

When I plug USB drive "temp" 2.702

Then the "temp" USB drive is selected 0.083

When I unplug USB drive "temp" 0.189

Then a suitable USB device is not found 0.017

Hooks

After features/support/hooks.rb:291 0.710

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.533

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.334

And I temporarily create a 7200 MiB disk named "install" 0.037

And I create a gpt partition with a vfat filesystem on disk "install" 4.108

And I plug USB drive "install" 2.565

And I install Tails to USB drive "install" by cloning 3:25.880

Then the running Tails is installed on USB drive "install" 12.526

But there is no persistence partition on USB drive "install" 0.080

Hooks

After features/support/hooks.rb:291 1.198

After features/support/hooks.rb:75 0.096

Tags: @product

3:48.221

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.263

And I temporarily create a 7200 MiB disk named "install" 0.042

And I plug USB drive "install" 2.543

And I install Tails to USB drive "install" by cloning 3:26.183

Then the running Tails is installed on USB drive "install" 11.108

But there is no persistence partition on USB drive "install" 0.080

Hooks

After features/support/hooks.rb:291 1.022

After features/support/hooks.rb:75 0.139

Tags: @product

9:58.801

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 5:21.448

And I create a file in the Persistent directory 0.328

And I temporarily create a 7200 MiB disk named "install" 0.043

And I create a gpt partition with a vfat filesystem on disk "install" 4.084

And I plug USB drive "install" 2.491

And I install Tails with Persistent Storage to USB drive "install" by cloning 4:14.631

Then the running Tails is installed on USB drive "install" 12.975

And there is a persistence partition on USB drive "install" 0.055

And the USB drive "install" contains the same files as my persistent storage 2.741

Hooks

After features/support/hooks.rb:291 2.117

After features/support/hooks.rb:75 0.168

Tags: @product

4:21.592

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.468

And I temporarily create a 7200 MiB disk named "install" 0.041

And I plug USB drive "install" 2.461

And I install Tails to USB drive "install" by cloning 3:49.789

Then the running Tails is installed on USB drive "install" 17.749

And there is no persistence partition on USB drive "install" 0.083

Hooks

After features/support/hooks.rb:291 2.624

After features/support/hooks.rb:75 0.101

Tags: @product

4:1.517

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.022

And I have started Tails from DVD without network and logged in 8.533

And I clone USB drive "__internal" to a temporary USB drive "install" 1.057

And I plug USB drive "install" 2.549

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:26.334

Then the running Tails is installed on USB drive "install" 12.957

And there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:291 1.129

After features/support/hooks.rb:75 0.094

Tags: @product @uefi

1:36.422

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.107

And I power off the computer 0.329

And the computer is set to boot in UEFI mode 0.023

When I start Tails from USB drive "__internal" with network unplugged and I login 1:22.646

Then Tails is running from USB drive "__internal" 0.287

And the boot device has safe access rights 2.971

And Tails has started in UEFI mode 0.056

Hooks

After features/support/hooks.rb:291 1.072

After features/support/hooks.rb:75 0.006

Tags: @product

1:44.030

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.248

And I plug and mount a USB drive containing a Tails USB image 27.767

And I create a 7200 MiB disk named "usbimage" 0.033

And I plug USB drive "usbimage" 2.382

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:5.598

Hooks

After features/support/hooks.rb:291 1.716

After features/support/hooks.rb:75 0.093

Tags: @product

1:18.088

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.155

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:16.878

Then Tails is running from USB drive "usbimage" 0.309

And the label of the system partition on "usbimage" is "Tails" 0.208

And the system partition on "usbimage" is an EFI system partition 0.154

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.144

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.083

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.077

And the system partition on "usbimage" has the expected flags 0.074

Hooks

After features/support/hooks.rb:291 0.708

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	31:44.974	Passed

Feature Report