Cucumber Reports (no 3302) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3302	28 Feb 2024, 12:43

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	35:49.072	Passed

Tags: @product @not_release_blocker

34.430

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.382

And I temporarily create a 4 GiB disk named "gptfat" 0.051

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.180

And I plug USB drive "gptfat" 2.536

When I start Tails Installer 19.230

Then I am told by Tails Installer that the destination device "is too small" 0.049

Hooks

After features/support/hooks.rb:291 1.034

After features/support/hooks.rb:75 0.001

Tags: @product

29.508

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.316

And I temporarily create a 7200 MiB disk named "temp" 0.043

And I start Tails Installer 18.002

But a suitable USB device is not found 0.036

When I plug USB drive "temp" 2.810

Then the "temp" USB drive is selected 0.079

When I unplug USB drive "temp" 0.201

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:291 1.258

After features/support/hooks.rb:75 0.000

Tags: @product

4:27.260

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.280

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 4.093

And I plug USB drive "install" 2.828

And I install Tails to USB drive "install" by cloning 3:48.484

Then the running Tails is installed on USB drive "install" 23.459

But there is no persistence partition on USB drive "install" 0.068

Hooks

After features/support/hooks.rb:291 1.212

After features/support/hooks.rb:75 0.094

Tags: @product

3:53.391

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.261

And I temporarily create a 7200 MiB disk named "install" 0.301

And I plug USB drive "install" 2.461

And I install Tails to USB drive "install" by cloning 3:29.917

Then the running Tails is installed on USB drive "install" 12.369

But there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:291 1.402

After features/support/hooks.rb:75 0.115

Tags: @product

13:31.038

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9:15.195

And I create a file in the Persistent directory 0.054

And I temporarily create a 7200 MiB disk named "install" 0.062

And I create a gpt partition with a vfat filesystem on disk "install" 5.162

And I plug USB drive "install" 2.519

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.681

Then the running Tails is installed on USB drive "install" 13.115

And there is a persistence partition on USB drive "install" 0.063

And the USB drive "install" contains the same files as my persistent storage 3.182

Hooks

After features/support/hooks.rb:291 2.087

After features/support/hooks.rb:75 0.168

Tags: @product

3:58.975

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.660

And I temporarily create a 7200 MiB disk named "install" 0.060

And I plug USB drive "install" 2.565

And I install Tails to USB drive "install" by cloning 3:31.086

Then the running Tails is installed on USB drive "install" 13.539

And there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.650

After features/support/hooks.rb:75 0.098

Tags: @product

4:5.240

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.788

And I have started Tails from DVD without network and logged in 9.138

And I clone USB drive "__internal" to a temporary USB drive "install" 1.050

And I plug USB drive "install" 2.517

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:27.287

Then the running Tails is installed on USB drive "install" 15.324

And there is no persistence partition on USB drive "install" 0.133

Hooks

After features/support/hooks.rb:291 1.362

After features/support/hooks.rb:75 0.090

Tags: @product @uefi

1:48.901

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 14.659

And I power off the computer 0.331

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 1:30.227

Then Tails is running from USB drive "__internal" 0.402

And the boot device has safe access rights 3.188

And Tails has started in UEFI mode 0.063

Hooks

After features/support/hooks.rb:291 1.233

After features/support/hooks.rb:75 0.016

Tags: @product

1:40.755

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.005

Steps

Given I have started Tails from DVD without network and logged in 8.655

And I plug and mount a USB drive containing a Tails USB image 29.060

And I create a 7200 MiB disk named "usbimage" 0.039

And I plug USB drive "usbimage" 2.408

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:0.591

Hooks

After features/support/hooks.rb:291 2.071

After features/support/hooks.rb:75 0.126

Tags: @product

1:19.569

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.160

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:18.310

Then Tails is running from USB drive "usbimage" 0.322

And the label of the system partition on "usbimage" is "Tails" 0.221

And the system partition on "usbimage" is an EFI system partition 0.139

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.166

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.080

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.077

And the system partition on "usbimage" has the expected flags 0.089

Hooks

After features/support/hooks.rb:291 0.735

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	35:49.072	Passed

Feature Report