Cucumber Reports (no 3303) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3303	29 Feb 2024, 12:37

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:54.664	Passed

Tags: @product @not_release_blocker

34.748

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.029

And I temporarily create a 4 GiB disk named "gptfat" 0.033

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.179

And I plug USB drive "gptfat" 2.476

When I start Tails Installer 19.975

Then I am told by Tails Installer that the destination device "is too small" 0.055

Hooks

After features/support/hooks.rb:291 1.448

After features/support/hooks.rb:75 0.001

Tags: @product

28.991

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.047

And I temporarily create a 7200 MiB disk named "temp" 0.130

And I start Tails Installer 17.779

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.689

Then the "temp" USB drive is selected 0.081

When I unplug USB drive "temp" 0.201

Then a suitable USB device is not found 0.041

Hooks

After features/support/hooks.rb:291 0.978

After features/support/hooks.rb:75 0.000

Tags: @product

3:57.316

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.241

And I temporarily create a 7200 MiB disk named "install" 0.037

And I create a gpt partition with a vfat filesystem on disk "install" 4.060

And I plug USB drive "install" 2.542

And I install Tails to USB drive "install" by cloning 3:31.578

Then the running Tails is installed on USB drive "install" 10.776

But there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.349

After features/support/hooks.rb:75 0.126

Tags: @product

3:51.135

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.249

And I temporarily create a 7200 MiB disk named "install" 0.095

And I plug USB drive "install" 2.525

And I install Tails to USB drive "install" by cloning 3:28.175

Then the running Tails is installed on USB drive "install" 12.034

But there is no persistence partition on USB drive "install" 0.054

Hooks

After features/support/hooks.rb:291 1.596

After features/support/hooks.rb:75 0.115

Tags: @product

4:26.447

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.869

And I create a file in the Persistent directory 0.082

And I temporarily create a 7200 MiB disk named "install" 0.025

And I create a gpt partition with a vfat filesystem on disk "install" 4.150

And I plug USB drive "install" 2.466

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:50.538

Then the running Tails is installed on USB drive "install" 13.154

And there is a persistence partition on USB drive "install" 0.077

And the USB drive "install" contains the same files as my persistent storage 4.083

Hooks

After features/support/hooks.rb:291 2.174

After features/support/hooks.rb:75 0.137

Tags: @product

3:57.497

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.007

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.948

And I temporarily create a 7200 MiB disk named "install" 0.034

And I plug USB drive "install" 2.487

And I install Tails to USB drive "install" by cloning 3:26.663

Then the running Tails is installed on USB drive "install" 16.292

And there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:291 1.636

After features/support/hooks.rb:75 0.109

Tags: @product

3:59.636

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.134

And I have started Tails from DVD without network and logged in 8.646

And I clone USB drive "__internal" to a temporary USB drive "install" 1.005

And I plug USB drive "install" 2.494

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:25.515

Then the running Tails is installed on USB drive "install" 11.768

And there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:291 1.380

After features/support/hooks.rb:75 0.143

Tags: @product @uefi

1:42.201

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.816

And I power off the computer 0.321

And the computer is set to boot in UEFI mode 0.021

When I start Tails from USB drive "__internal" with network unplugged and I login 1:27.131

Then Tails is running from USB drive "__internal" 0.328

And the boot device has safe access rights 3.514

And Tails has started in UEFI mode 0.067

Hooks

After features/support/hooks.rb:291 0.936

After features/support/hooks.rb:75 0.006

Tags: @product

1:37.011

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.718

And I plug and mount a USB drive containing a Tails USB image 27.795

And I create a 7200 MiB disk named "usbimage" 0.033

And I plug USB drive "usbimage" 2.439

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 58.024

Hooks

After features/support/hooks.rb:291 1.657

After features/support/hooks.rb:75 0.086

Tags: @product

1:19.678

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.262

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:18.241

Then Tails is running from USB drive "usbimage" 0.342

And the label of the system partition on "usbimage" is "Tails" 0.208

And the system partition on "usbimage" is an EFI system partition 0.177

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.142

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.093

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.086

And the system partition on "usbimage" has the expected flags 0.123

Hooks

After features/support/hooks.rb:291 0.631

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:54.664	Passed

Feature Report