Cucumber Reports (no 3306) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3306	02 Mar 2024, 12:52

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	27:29.257	Passed

Tags: @product @not_release_blocker

36.067

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.203

And I temporarily create a 4 GiB disk named "gptfat" 0.064

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.051

And I plug USB drive "gptfat" 2.474

When I start Tails Installer 20.200

Then I am told by Tails Installer that the destination device "is too small" 0.074

Hooks

After features/support/hooks.rb:291 0.992

After features/support/hooks.rb:75 0.001

Tags: @product

30.168

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.769

And I temporarily create a 7200 MiB disk named "temp" 0.044

And I start Tails Installer 18.257

But a suitable USB device is not found 0.055

When I plug USB drive "temp" 2.729

Then the "temp" USB drive is selected 0.097

When I unplug USB drive "temp" 0.190

Then a suitable USB device is not found 0.025

Hooks

After features/support/hooks.rb:291 1.133

After features/support/hooks.rb:75 0.000

Tags: @product

4:26.236

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.258

And I temporarily create a 7200 MiB disk named "install" 0.052

And I create a gpt partition with a vfat filesystem on disk "install" 6.559

And I plug USB drive "install" 2.497

And I install Tails to USB drive "install" by cloning 3:57.589

Then the running Tails is installed on USB drive "install" 11.213

But there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:291 1.201

After features/support/hooks.rb:75 0.110

Tags: @product

3:49.543

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.321

And I temporarily create a 7200 MiB disk named "install" 0.070

And I plug USB drive "install" 2.482

And I install Tails to USB drive "install" by cloning 3:27.232

Then the running Tails is installed on USB drive "install" 11.363

But there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.362

After features/support/hooks.rb:75 0.112

Tags: @product

4:28.926

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.170

And I create a file in the Persistent directory 0.071

And I temporarily create a 7200 MiB disk named "install" 0.059

And I create a gpt partition with a vfat filesystem on disk "install" 4.194

And I plug USB drive "install" 2.577

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.826

Then the running Tails is installed on USB drive "install" 12.969

And there is a persistence partition on USB drive "install" 0.058

And the USB drive "install" contains the same files as my persistent storage 3.998

Hooks

After features/support/hooks.rb:291 2.245

After features/support/hooks.rb:75 0.128

Tags: @product

4:3.184

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.524

And I temporarily create a 7200 MiB disk named "install" 0.055

And I plug USB drive "install" 2.556

And I install Tails to USB drive "install" by cloning 3:30.471

Then the running Tails is installed on USB drive "install" 17.510

And there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:291 1.831

After features/support/hooks.rb:75 0.107

Tags: @product

4:36.598

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 16.537

And I have started Tails from DVD without network and logged in 9.030

And I clone USB drive "__internal" to a temporary USB drive "install" 1.212

And I plug USB drive "install" 2.518

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:51.477

Then the running Tails is installed on USB drive "install" 15.740

And there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:291 1.732

After features/support/hooks.rb:75 0.129

Tags: @product @uefi

1:49.411

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 15.359

And I power off the computer 0.340

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 1:30.229

Then Tails is running from USB drive "__internal" 0.390

And the boot device has safe access rights 3.007

And Tails has started in UEFI mode 0.056

Hooks

After features/support/hooks.rb:291 1.708

After features/support/hooks.rb:75 0.005

Tags: @product

1:49.329

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.408

And I plug and mount a USB drive containing a Tails USB image 37.085

And I create a 7200 MiB disk named "usbimage" 0.090

And I plug USB drive "usbimage" 2.422

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:1.322

Hooks

After features/support/hooks.rb:291 1.732

After features/support/hooks.rb:75 0.087

Tags: @product

1:19.790

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.179

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:18.481

Then Tails is running from USB drive "usbimage" 0.329

And the label of the system partition on "usbimage" is "Tails" 0.208

And the system partition on "usbimage" is an EFI system partition 0.147

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.153

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.104

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.111

And the system partition on "usbimage" has the expected flags 0.074

Hooks

After features/support/hooks.rb:291 0.690

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	27:29.257	Passed

Feature Report