Cucumber Reports (no 3307) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3307	03 Mar 2024, 12:01

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:16.400	Passed

Tags: @product @not_release_blocker

33.125

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.854

And I temporarily create a 4 GiB disk named "gptfat" 0.039

And I create a gpt partition with a vfat filesystem on disk "gptfat" 3.964

And I plug USB drive "gptfat" 2.528

When I start Tails Installer 18.700

Then I am told by Tails Installer that the destination device "is too small" 0.037

Hooks

After features/support/hooks.rb:291 1.079

After features/support/hooks.rb:75 0.001

Tags: @product

28.356

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.779

And I temporarily create a 7200 MiB disk named "temp" 0.038

And I start Tails Installer 17.630

But a suitable USB device is not found 0.046

When I plug USB drive "temp" 2.578

Then the "temp" USB drive is selected 0.078

When I unplug USB drive "temp" 0.183

Then a suitable USB device is not found 0.021

Hooks

After features/support/hooks.rb:291 1.377

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.983

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.865

And I temporarily create a 7200 MiB disk named "install" 0.038

And I create a gpt partition with a vfat filesystem on disk "install" 4.035

And I plug USB drive "install" 2.505

And I install Tails to USB drive "install" by cloning 3:29.429

Then the running Tails is installed on USB drive "install" 10.052

But there is no persistence partition on USB drive "install" 0.057

Hooks

After features/support/hooks.rb:291 1.244

After features/support/hooks.rb:75 0.109

Tags: @product

3:46.306

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.944

And I temporarily create a 7200 MiB disk named "install" 0.042

And I plug USB drive "install" 2.407

And I install Tails to USB drive "install" by cloning 3:25.879

Then the running Tails is installed on USB drive "install" 9.958

But there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.159

After features/support/hooks.rb:75 0.110

Tags: @product

4:25.158

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.259

And I create a file in the Persistent directory 0.103

And I temporarily create a 7200 MiB disk named "install" 0.041

And I create a gpt partition with a vfat filesystem on disk "install" 3.987

And I plug USB drive "install" 2.508

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:50.860

Then the running Tails is installed on USB drive "install" 13.265

And there is a persistence partition on USB drive "install" 0.059

And the USB drive "install" contains the same files as my persistent storage 3.072

Hooks

After features/support/hooks.rb:291 2.346

After features/support/hooks.rb:75 0.121

Tags: @product

3:55.433

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.332

And I temporarily create a 7200 MiB disk named "install" 0.028

And I plug USB drive "install" 2.469

And I install Tails to USB drive "install" by cloning 3:28.225

Then the running Tails is installed on USB drive "install" 13.300

And there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:291 1.405

After features/support/hooks.rb:75 0.102

Tags: @product

3:58.110

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.959

And I have started Tails from DVD without network and logged in 8.218

And I clone USB drive "__internal" to a temporary USB drive "install" 1.021

And I plug USB drive "install" 2.482

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:26.170

Then the running Tails is installed on USB drive "install" 10.188

And there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:291 1.140

After features/support/hooks.rb:75 0.120

Tags: @product @uefi

1:33.854

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 9.872

And I power off the computer 0.320

And the computer is set to boot in UEFI mode 0.021

When I start Tails from USB drive "__internal" with network unplugged and I login 1:20.594

Then Tails is running from USB drive "__internal" 0.329

And the boot device has safe access rights 2.668

And Tails has started in UEFI mode 0.048

Hooks

After features/support/hooks.rb:291 0.648

After features/support/hooks.rb:75 0.005

Tags: @product

1:27.587

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.037

And I plug and mount a USB drive containing a Tails USB image 25.925

And I create a 7200 MiB disk named "usbimage" 0.034

And I plug USB drive "usbimage" 2.378

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 51.211

Hooks

After features/support/hooks.rb:291 1.761

After features/support/hooks.rb:75 0.083

Tags: @product

1:14.483

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.150

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:13.314

Then Tails is running from USB drive "usbimage" 0.303

And the label of the system partition on "usbimage" is "Tails" 0.188

And the system partition on "usbimage" is an EFI system partition 0.138

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.167

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.079

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.070

And the system partition on "usbimage" has the expected flags 0.071

Hooks

After features/support/hooks.rb:291 0.608

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:16.400	Passed

Feature Report