Cucumber Reports (no 3310) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3310	06 Mar 2024, 12:17

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:35.660	Passed

Tags: @product @not_release_blocker

33.462

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 7.971

And I temporarily create a 4 GiB disk named "gptfat" 0.032

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.006

And I plug USB drive "gptfat" 2.557

When I start Tails Installer 18.847

Then I am told by Tails Installer that the destination device "is too small" 0.047

Hooks

After features/support/hooks.rb:291 1.168

After features/support/hooks.rb:75 0.001

Tags: @product

30.261

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.166

And I temporarily create a 7200 MiB disk named "temp" 0.036

And I start Tails Installer 18.005

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.739

Then the "temp" USB drive is selected 0.081

When I unplug USB drive "temp" 0.185

Then a suitable USB device is not found 0.026

Hooks

After features/support/hooks.rb:291 1.353

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.978

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.547

And I temporarily create a 7200 MiB disk named "install" 0.029

And I create a gpt partition with a vfat filesystem on disk "install" 4.043

And I plug USB drive "install" 2.591

And I install Tails to USB drive "install" by cloning 3:27.364

Then the running Tails is installed on USB drive "install" 11.338

But there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.379

After features/support/hooks.rb:75 0.110

Tags: @product

3:48.548

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.393

And I temporarily create a 7200 MiB disk named "install" 0.041

And I plug USB drive "install" 2.450

And I install Tails to USB drive "install" by cloning 3:27.145

Then the running Tails is installed on USB drive "install" 10.456

But there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:291 1.240

After features/support/hooks.rb:75 0.110

Tags: @product

4:25.670

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.884

And I create a file in the Persistent directory 0.066

And I temporarily create a 7200 MiB disk named "install" 0.048

And I create a gpt partition with a vfat filesystem on disk "install" 4.052

And I plug USB drive "install" 2.428

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.258

Then the running Tails is installed on USB drive "install" 12.638

And there is a persistence partition on USB drive "install" 0.072

And the USB drive "install" contains the same files as my persistent storage 3.221

Hooks

After features/support/hooks.rb:291 1.900

After features/support/hooks.rb:75 0.131

Tags: @product

3:54.859

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.353

And I temporarily create a 7200 MiB disk named "install" 0.032

And I plug USB drive "install" 2.529

And I install Tails to USB drive "install" by cloning 3:27.056

Then the running Tails is installed on USB drive "install" 13.822

And there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.486

After features/support/hooks.rb:75 0.098

Tags: @product

4:1.000

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.251

And I have started Tails from DVD without network and logged in 8.729

And I clone USB drive "__internal" to a temporary USB drive "install" 1.201

And I plug USB drive "install" 2.479

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:26.995

Then the running Tails is installed on USB drive "install" 11.271

And there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:291 1.406

After features/support/hooks.rb:75 0.108

Tags: @product @uefi

1:39.430

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 9.901

And I power off the computer 0.339

And the computer is set to boot in UEFI mode 0.023

When I start Tails from USB drive "__internal" with network unplugged and I login 1:25.750

Then Tails is running from USB drive "__internal" 0.319

And the boot device has safe access rights 3.023

And Tails has started in UEFI mode 0.073

Hooks

After features/support/hooks.rb:291 1.153

After features/support/hooks.rb:75 0.006

Tags: @product

1:30.922

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.298

And I plug and mount a USB drive containing a Tails USB image 27.353

And I create a 7200 MiB disk named "usbimage" 0.183

And I plug USB drive "usbimage" 2.415

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 52.671

Hooks

After features/support/hooks.rb:291 1.547

After features/support/hooks.rb:75 0.093

Tags: @product

1:17.525

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.121

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:16.282

Then Tails is running from USB drive "usbimage" 0.341

And the label of the system partition on "usbimage" is "Tails" 0.256

And the system partition on "usbimage" is an EFI system partition 0.152

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.150

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.068

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.077

And the system partition on "usbimage" has the expected flags 0.075

Hooks

After features/support/hooks.rb:291 1.207

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:35.660	Passed

Feature Report