Cucumber Reports (no 3317) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3317	11 Mar 2024, 18:35

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:20.359	Passed

Tags: @product @not_release_blocker

34.239

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 7.949

And I temporarily create a 4 GiB disk named "gptfat" 0.044

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.902

And I plug USB drive "gptfat" 2.492

When I start Tails Installer 18.814

Then I am told by Tails Installer that the destination device "is too small" 0.037

Hooks

After features/support/hooks.rb:291 1.995

After features/support/hooks.rb:75 0.001

Tags: @product

29.093

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.278

And I temporarily create a 7200 MiB disk named "temp" 0.084

And I start Tails Installer 17.710

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.681

Then the "temp" USB drive is selected 0.115

When I unplug USB drive "temp" 0.183

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:291 1.520

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.840

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 7.973

And I temporarily create a 7200 MiB disk named "install" 0.073

And I create a gpt partition with a vfat filesystem on disk "install" 5.147

And I plug USB drive "install" 2.580

And I install Tails to USB drive "install" by cloning 3:26.763

Then the running Tails is installed on USB drive "install" 11.234

But there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:291 1.185

After features/support/hooks.rb:75 0.110

Tags: @product

3:46.939

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.105

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 2.454

And I install Tails to USB drive "install" by cloning 3:24.847

Then the running Tails is installed on USB drive "install" 11.420

But there is no persistence partition on USB drive "install" 0.062

Hooks

After features/support/hooks.rb:291 1.299

After features/support/hooks.rb:75 0.140

Tags: @product

4:37.296

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.409

And I create a file in the Persistent directory 0.103

And I temporarily create a 7200 MiB disk named "install" 0.080

And I create a gpt partition with a vfat filesystem on disk "install" 5.219

And I plug USB drive "install" 3.471

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.479

Then the running Tails is installed on USB drive "install" 16.819

And there is a persistence partition on USB drive "install" 0.123

And the USB drive "install" contains the same files as my persistent storage 4.589

Hooks

After features/support/hooks.rb:291 2.481

After features/support/hooks.rb:75 0.121

Tags: @product

3:58.858

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.986

And I temporarily create a 7200 MiB disk named "install" 0.063

And I plug USB drive "install" 2.508

And I install Tails to USB drive "install" by cloning 3:25.276

Then the running Tails is installed on USB drive "install" 18.950

And there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:291 1.612

After features/support/hooks.rb:75 0.101

Tags: @product

4:24.836

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.917

And I have started Tails from DVD without network and logged in 8.489

And I clone USB drive "__internal" to a temporary USB drive "install" 1.135

And I plug USB drive "install" 2.648

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:51.395

Then the running Tails is installed on USB drive "install" 11.183

And there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:291 1.295

After features/support/hooks.rb:75 0.130

Tags: @product @uefi

1:37.531

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.194

And I power off the computer 0.328

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:22.512

Then Tails is running from USB drive "__internal" 0.345

And the boot device has safe access rights 3.082

And Tails has started in UEFI mode 0.041

Hooks

After features/support/hooks.rb:291 0.582

After features/support/hooks.rb:75 0.009

Tags: @product

1:37.756

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.371

And I plug and mount a USB drive containing a Tails USB image 30.145

And I create a 7200 MiB disk named "usbimage" 0.051

And I plug USB drive "usbimage" 2.456

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 56.731

Hooks

After features/support/hooks.rb:291 1.975

After features/support/hooks.rb:75 0.087

Tags: @product

1:19.966

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given a computer 0.144

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:18.701

Then Tails is running from USB drive "usbimage" 0.355

And the label of the system partition on "usbimage" is "Tails" 0.214

And the system partition on "usbimage" is an EFI system partition 0.162

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.134

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.080

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.076

And the system partition on "usbimage" has the expected flags 0.097

Hooks

After features/support/hooks.rb:291 0.618

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:20.359	Passed

Feature Report