Cucumber Reports (no 3320) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3320	14 Mar 2024, 12:31

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:27.981	Passed

Tags: @product @not_release_blocker

35.465

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.661

And I temporarily create a 4 GiB disk named "gptfat" 0.050

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.031

And I plug USB drive "gptfat" 2.487

When I start Tails Installer 19.189

Then I am told by Tails Installer that the destination device "is too small" 0.044

Hooks

After features/support/hooks.rb:291 1.066

After features/support/hooks.rb:75 0.001

Tags: @product

29.457

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.689

And I temporarily create a 7200 MiB disk named "temp" 0.076

And I start Tails Installer 17.735

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.628

Then the "temp" USB drive is selected 0.092

When I unplug USB drive "temp" 0.189

Then a suitable USB device is not found 0.024

Hooks

After features/support/hooks.rb:291 0.880

After features/support/hooks.rb:75 0.000

Tags: @product

3:58.537

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.147

And I temporarily create a 7200 MiB disk named "install" 0.053

And I create a gpt partition with a vfat filesystem on disk "install" 4.238

And I plug USB drive "install" 2.511

And I install Tails to USB drive "install" by cloning 3:31.507

Then the running Tails is installed on USB drive "install" 12.016

But there is no persistence partition on USB drive "install" 0.062

Hooks

After features/support/hooks.rb:291 1.873

After features/support/hooks.rb:75 0.124

Tags: @product

3:51.528

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.000

And I temporarily create a 7200 MiB disk named "install" 0.098

And I plug USB drive "install" 2.556

And I install Tails to USB drive "install" by cloning 3:28.351

Then the running Tails is installed on USB drive "install" 11.447

But there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:291 1.483

After features/support/hooks.rb:75 0.112

Tags: @product

4:29.510

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.280

And I create a file in the Persistent directory 0.079

And I temporarily create a 7200 MiB disk named "install" 0.046

And I create a gpt partition with a vfat filesystem on disk "install" 4.193

And I plug USB drive "install" 2.429

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.840

Then the running Tails is installed on USB drive "install" 13.459

And there is a persistence partition on USB drive "install" 0.058

And the USB drive "install" contains the same files as my persistent storage 5.122

Hooks

After features/support/hooks.rb:291 2.158

After features/support/hooks.rb:75 0.132

Tags: @product

4:3.168

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.884

And I temporarily create a 7200 MiB disk named "install" 0.056

And I plug USB drive "install" 2.483

And I install Tails to USB drive "install" by cloning 3:29.735

Then the running Tails is installed on USB drive "install" 15.942

And there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.551

After features/support/hooks.rb:75 0.124

Tags: @product

4:1.595

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.343

And I have started Tails from DVD without network and logged in 9.440

And I clone USB drive "__internal" to a temporary USB drive "install" 1.165

And I plug USB drive "install" 2.563

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:26.406

Then the running Tails is installed on USB drive "install" 11.613

And there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.224

After features/support/hooks.rb:75 0.119

Tags: @product @uefi

1:44.334

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.658

And I power off the computer 0.329

And the computer is set to boot in UEFI mode 0.027

When I start Tails from USB drive "__internal" with network unplugged and I login 1:29.983

Then Tails is running from USB drive "__internal" 0.342

And the boot device has safe access rights 2.937

And Tails has started in UEFI mode 0.056

Hooks

After features/support/hooks.rb:291 0.679

After features/support/hooks.rb:75 0.026

Tags: @product

1:44.653

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.213

And I plug and mount a USB drive containing a Tails USB image 32.993

And I create a 7200 MiB disk named "usbimage" 0.059

And I plug USB drive "usbimage" 2.455

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:0.931

Hooks

After features/support/hooks.rb:291 2.064

After features/support/hooks.rb:75 0.091

Tags: @product

1:29.729

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.408

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:28.251

Then Tails is running from USB drive "usbimage" 0.336

And the label of the system partition on "usbimage" is "Tails" 0.211

And the system partition on "usbimage" is an EFI system partition 0.143

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.133

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.073

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.088

And the system partition on "usbimage" has the expected flags 0.083

Hooks

After features/support/hooks.rb:291 1.235

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:27.981	Passed

Feature Report