Cucumber Reports (no 3323) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3323	16 Mar 2024, 12:48

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:51.409	Passed

Tags: @product @not_release_blocker

35.612

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.282

And I temporarily create a 4 GiB disk named "gptfat" 0.047

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.147

And I plug USB drive "gptfat" 2.622

When I start Tails Installer 19.448

Then I am told by Tails Installer that the destination device "is too small" 0.062

Hooks

After features/support/hooks.rb:291 1.689

After features/support/hooks.rb:75 0.001

Tags: @product

29.654

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.210

And I temporarily create a 7200 MiB disk named "temp" 0.099

And I start Tails Installer 18.380

But a suitable USB device is not found 0.022

When I plug USB drive "temp" 2.628

Then the "temp" USB drive is selected 0.101

When I unplug USB drive "temp" 0.188

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:291 1.405

After features/support/hooks.rb:75 0.000

Tags: @product

3:53.419

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.217

And I temporarily create a 7200 MiB disk named "install" 0.063

And I create a gpt partition with a vfat filesystem on disk "install" 4.990

And I plug USB drive "install" 2.437

And I install Tails to USB drive "install" by cloning 3:26.236

Then the running Tails is installed on USB drive "install" 11.410

But there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.602

After features/support/hooks.rb:75 0.115

Tags: @product

3:50.350

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.397

And I temporarily create a 7200 MiB disk named "install" 0.067

And I plug USB drive "install" 2.431

And I install Tails to USB drive "install" by cloning 3:28.380

Then the running Tails is installed on USB drive "install" 11.002

But there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:291 1.188

After features/support/hooks.rb:75 0.110

Tags: @product

4:28.916

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.390

And I create a file in the Persistent directory 0.110

And I temporarily create a 7200 MiB disk named "install" 0.036

And I create a gpt partition with a vfat filesystem on disk "install" 5.135

And I plug USB drive "install" 2.475

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:51.919

Then the running Tails is installed on USB drive "install" 13.627

And there is a persistence partition on USB drive "install" 0.065

And the USB drive "install" contains the same files as my persistent storage 3.155

Hooks

After features/support/hooks.rb:291 2.258

After features/support/hooks.rb:75 0.125

Tags: @product

4:0.807

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.378

And I temporarily create a 7200 MiB disk named "install" 0.055

And I plug USB drive "install" 2.529

And I install Tails to USB drive "install" by cloning 3:27.142

Then the running Tails is installed on USB drive "install" 18.627

And there is no persistence partition on USB drive "install" 0.074

Hooks

After features/support/hooks.rb:291 2.162

After features/support/hooks.rb:75 0.684

Tags: @product

4:25.662

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.011

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 17.193

And I have started Tails from DVD without network and logged in 8.537

And I clone USB drive "__internal" to a temporary USB drive "install" 1.153

And I plug USB drive "install" 2.447

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:45.016

Then the running Tails is installed on USB drive "install" 11.248

And there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:291 1.474

After features/support/hooks.rb:75 0.112

Tags: @product @uefi

1:44.738

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.112

And I power off the computer 0.327

And the computer is set to boot in UEFI mode 0.031

When I start Tails from USB drive "__internal" with network unplugged and I login 1:28.940

Then Tails is running from USB drive "__internal" 0.330

And the boot device has safe access rights 2.943

And Tails has started in UEFI mode 0.051

Hooks

After features/support/hooks.rb:291 1.231

After features/support/hooks.rb:75 0.006

Tags: @product

1:57.104

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.658

And I plug and mount a USB drive containing a Tails USB image 29.959

And I create a 7200 MiB disk named "usbimage" 0.045

And I plug USB drive "usbimage" 2.415

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:16.024

Hooks

After features/support/hooks.rb:291 2.955

After features/support/hooks.rb:75 0.094

Tags: @product

1:25.143

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given a computer 0.172

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:23.808

Then Tails is running from USB drive "usbimage" 0.368

And the label of the system partition on "usbimage" is "Tails" 0.212

And the system partition on "usbimage" is an EFI system partition 0.145

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.150

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.094

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.096

And the system partition on "usbimage" has the expected flags 0.094

Hooks

After features/support/hooks.rb:291 0.644

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:51.409	Passed

Feature Report