Cucumber Reports (no 3324) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3324	17 Mar 2024, 12:27

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:25.000	Passed

Tags: @product @not_release_blocker

35.058

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.554

And I temporarily create a 4 GiB disk named "gptfat" 0.059

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.035

And I plug USB drive "gptfat" 2.648

When I start Tails Installer 18.717

Then I am told by Tails Installer that the destination device "is too small" 0.041

Hooks

After features/support/hooks.rb:291 0.885

After features/support/hooks.rb:75 0.001

Tags: @product

30.997

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.046

And I temporarily create a 7200 MiB disk named "temp" 0.102

And I start Tails Installer 18.863

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.640

Then the "temp" USB drive is selected 0.082

When I unplug USB drive "temp" 0.213

Then a suitable USB device is not found 0.027

Hooks

After features/support/hooks.rb:291 1.277

After features/support/hooks.rb:75 0.000

Tags: @product

4:14.086

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.464

And I temporarily create a 7200 MiB disk named "install" 0.462

And I create a gpt partition with a vfat filesystem on disk "install" 5.189

And I plug USB drive "install" 2.537

And I install Tails to USB drive "install" by cloning 3:46.233

Then the running Tails is installed on USB drive "install" 11.130

But there is no persistence partition on USB drive "install" 0.068

Hooks

After features/support/hooks.rb:291 1.761

After features/support/hooks.rb:75 0.110

Tags: @product

3:48.291

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.811

And I temporarily create a 7200 MiB disk named "install" 0.066

And I plug USB drive "install" 2.447

And I install Tails to USB drive "install" by cloning 3:25.463

Then the running Tails is installed on USB drive "install" 11.441

But there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:291 1.148

After features/support/hooks.rb:75 0.140

Tags: @product

4:26.858

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.957

And I create a file in the Persistent directory 0.134

And I temporarily create a 7200 MiB disk named "install" 0.051

And I create a gpt partition with a vfat filesystem on disk "install" 4.165

And I plug USB drive "install" 2.496

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:52.000

Then the running Tails is installed on USB drive "install" 12.932

And there is a persistence partition on USB drive "install" 0.070

And the USB drive "install" contains the same files as my persistent storage 4.048

Hooks

After features/support/hooks.rb:291 2.307

After features/support/hooks.rb:75 0.138

Tags: @product

3:58.431

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.374

And I temporarily create a 7200 MiB disk named "install" 0.059

And I plug USB drive "install" 2.512

And I install Tails to USB drive "install" by cloning 3:29.588

Then the running Tails is installed on USB drive "install" 14.833

And there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:291 1.755

After features/support/hooks.rb:75 0.108

Tags: @product

4:1.366

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.089

And I have started Tails from DVD without network and logged in 8.587

And I clone USB drive "__internal" to a temporary USB drive "install" 1.456

And I plug USB drive "install" 2.459

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:25.032

Then the running Tails is installed on USB drive "install" 13.667

And there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.205

After features/support/hooks.rb:75 0.127

Tags: @product @uefi

1:40.695

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 13.214

And I power off the computer 0.331

And the computer is set to boot in UEFI mode 0.026

When I start Tails from USB drive "__internal" with network unplugged and I login 1:23.962

Then Tails is running from USB drive "__internal" 0.324

And the boot device has safe access rights 2.784

And Tails has started in UEFI mode 0.051

Hooks

After features/support/hooks.rb:291 0.767

After features/support/hooks.rb:75 0.005

Tags: @product

1:48.660

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.138

And I plug and mount a USB drive containing a Tails USB image 32.495

And I create a 7200 MiB disk named "usbimage" 0.218

And I plug USB drive "usbimage" 2.448

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:5.359

Hooks

After features/support/hooks.rb:291 1.880

After features/support/hooks.rb:75 0.110

Tags: @product

1:20.553

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.006

Steps

Given a computer 0.188

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:19.320

Then Tails is running from USB drive "usbimage" 0.310

And the label of the system partition on "usbimage" is "Tails" 0.189

And the system partition on "usbimage" is an EFI system partition 0.159

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.166

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.069

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.069

And the system partition on "usbimage" has the expected flags 0.079

Hooks

After features/support/hooks.rb:291 0.588

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:25.000	Passed

Feature Report