Cucumber Reports (no 3326) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3326	18 Mar 2024, 15:49

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:24.649	Passed

Tags: @product @not_release_blocker

23.584

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.221

And I temporarily create a 4 GiB disk named "gptfat" 0.068

And I create a gpt partition with a vfat filesystem on disk "gptfat" 4.130

And I plug USB drive "gptfat" 2.529

When I start Tails Installer 8.580

Then I am told by Tails Installer that the destination device "is too small" 0.054

Hooks

After features/support/hooks.rb:291 1.604

After features/support/hooks.rb:75 0.001

Tags: @product

19.795

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.332

And I temporarily create a 7200 MiB disk named "temp" 0.550

And I start Tails Installer 8.038

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.501

Then the "temp" USB drive is selected 0.128

When I unplug USB drive "temp" 0.199

Then a suitable USB device is not found 0.024

Hooks

After features/support/hooks.rb:291 0.929

After features/support/hooks.rb:75 0.000

Tags: @product

3:45.585

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.608

And I temporarily create a 7200 MiB disk named "install" 0.061

And I create a gpt partition with a vfat filesystem on disk "install" 5.408

And I plug USB drive "install" 2.563

And I install Tails to USB drive "install" by cloning 3:16.320

Then the running Tails is installed on USB drive "install" 11.558

But there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.119

After features/support/hooks.rb:75 0.110

Tags: @product

3:37.442

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.541

And I temporarily create a 7200 MiB disk named "install" 0.066

And I plug USB drive "install" 2.460

And I install Tails to USB drive "install" by cloning 3:15.288

Then the running Tails is installed on USB drive "install" 11.033

But there is no persistence partition on USB drive "install" 0.051

Hooks

After features/support/hooks.rb:291 1.469

After features/support/hooks.rb:75 0.114

Tags: @product

4:17.525

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.872

And I create a file in the Persistent directory 0.073

And I temporarily create a 7200 MiB disk named "install" 0.040

And I create a gpt partition with a vfat filesystem on disk "install" 4.201

And I plug USB drive "install" 2.437

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.111

Then the running Tails is installed on USB drive "install" 13.063

And there is a persistence partition on USB drive "install" 0.064

And the USB drive "install" contains the same files as my persistent storage 3.661

Hooks

After features/support/hooks.rb:291 1.944

After features/support/hooks.rb:75 0.121

Tags: @product

3:44.618

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.486

And I temporarily create a 7200 MiB disk named "install" 0.083

And I plug USB drive "install" 2.478

And I install Tails to USB drive "install" by cloning 3:17.363

Then the running Tails is installed on USB drive "install" 13.131

And there is no persistence partition on USB drive "install" 0.074

Hooks

After features/support/hooks.rb:291 1.479

After features/support/hooks.rb:75 0.108

Tags: @product

3:53.221

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.465

And I have started Tails from DVD without network and logged in 8.910

And I clone USB drive "__internal" to a temporary USB drive "install" 1.172

And I plug USB drive "install" 2.776

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:17.979

Then the running Tails is installed on USB drive "install" 12.845

And there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:291 1.207

After features/support/hooks.rb:75 0.104

Tags: @product @uefi

1:39.879

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.401

And I power off the computer 0.311

And the computer is set to boot in UEFI mode 0.025

When I start Tails from USB drive "__internal" with network unplugged and I login 1:25.839

Then Tails is running from USB drive "__internal" 0.326

And the boot device has safe access rights 2.910

And Tails has started in UEFI mode 0.064

Hooks

After features/support/hooks.rb:291 0.626

After features/support/hooks.rb:75 0.006

Tags: @product

1:24.000

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.075

And I plug and mount a USB drive containing a Tails USB image 29.192

And I create a 7200 MiB disk named "usbimage" 0.032

And I plug USB drive "usbimage" 2.406

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 44.293

Hooks

After features/support/hooks.rb:291 2.534

After features/support/hooks.rb:75 0.092

Tags: @product

1:18.994

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.125

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:17.800

Then Tails is running from USB drive "usbimage" 0.326

And the label of the system partition on "usbimage" is "Tails" 0.209

And the system partition on "usbimage" is an EFI system partition 0.159

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.143

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.073

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.078

And the system partition on "usbimage" has the expected flags 0.075

Hooks

After features/support/hooks.rb:291 0.698

After features/support/hooks.rb:75 0.008

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:24.649	Passed

Feature Report