Cucumber Reports (no 3328) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3328	19 Mar 2024, 12:25

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:11.119	Passed

Tags: @product @not_release_blocker

25.203

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.715

And I temporarily create a 4 GiB disk named "gptfat" 0.062

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.089

And I plug USB drive "gptfat" 2.458

When I start Tails Installer 8.782

Then I am told by Tails Installer that the destination device "is too small" 0.095

Hooks

After features/support/hooks.rb:291 0.891

After features/support/hooks.rb:75 0.001

Tags: @product

19.881

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.650

And I temporarily create a 7200 MiB disk named "temp" 0.044

And I start Tails Installer 8.409

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.427

Then the "temp" USB drive is selected 0.112

When I unplug USB drive "temp" 0.191

Then a suitable USB device is not found 0.022

Hooks

After features/support/hooks.rb:291 0.884

After features/support/hooks.rb:75 0.000

Tags: @product

3:45.973

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.652

And I temporarily create a 7200 MiB disk named "install" 0.059

And I create a gpt partition with a vfat filesystem on disk "install" 4.262

And I plug USB drive "install" 2.552

And I install Tails to USB drive "install" by cloning 3:19.649

Then the running Tails is installed on USB drive "install" 10.706

But there is no persistence partition on USB drive "install" 0.090

Hooks

After features/support/hooks.rb:291 1.396

After features/support/hooks.rb:75 0.110

Tags: @product

3:40.564

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.240

And I temporarily create a 7200 MiB disk named "install" 0.120

And I plug USB drive "install" 2.500

And I install Tails to USB drive "install" by cloning 3:18.672

Then the running Tails is installed on USB drive "install" 10.969

But there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:291 1.045

After features/support/hooks.rb:75 0.111

Tags: @product

4:16.833

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.828

And I create a file in the Persistent directory 0.072

And I temporarily create a 7200 MiB disk named "install" 0.057

And I create a gpt partition with a vfat filesystem on disk "install" 5.102

And I plug USB drive "install" 2.469

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:40.980

Then the running Tails is installed on USB drive "install" 12.909

And there is a persistence partition on USB drive "install" 0.064

And the USB drive "install" contains the same files as my persistent storage 3.349

Hooks

After features/support/hooks.rb:291 1.976

After features/support/hooks.rb:75 0.123

Tags: @product

4:53.296

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 1:0.659

And I temporarily create a 7200 MiB disk named "install" 0.069

And I plug USB drive "install" 2.422

And I install Tails to USB drive "install" by cloning 3:20.214

Then the running Tails is installed on USB drive "install" 29.858

And there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:291 1.397

After features/support/hooks.rb:75 0.104

Tags: @product

3:53.649

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 15.728

And I have started Tails from DVD without network and logged in 8.451

And I clone USB drive "__internal" to a temporary USB drive "install" 1.049

And I plug USB drive "install" 2.419

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:13.887

Then the running Tails is installed on USB drive "install" 12.047

And there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:291 1.064

After features/support/hooks.rb:75 0.126

Tags: @product @uefi

1:46.541

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 10.381

And I power off the computer 0.318

And the computer is set to boot in UEFI mode 0.023

When I start Tails from USB drive "__internal" with network unplugged and I login 1:32.673

Then Tails is running from USB drive "__internal" 0.330

And the boot device has safe access rights 2.769

And Tails has started in UEFI mode 0.045

Hooks

After features/support/hooks.rb:291 0.570

After features/support/hooks.rb:75 0.049

Tags: @product

1:46.688

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.005

Steps

Given I have started Tails from DVD without network and logged in 8.238

And I plug and mount a USB drive containing a Tails USB image 31.540

And I create a 7200 MiB disk named "usbimage" 0.041

And I plug USB drive "usbimage" 2.370

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:4.497

Hooks

After features/support/hooks.rb:291 2.124

After features/support/hooks.rb:75 0.101

Tags: @product

1:22.486

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.171

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:21.271

Then Tails is running from USB drive "usbimage" 0.321

And the label of the system partition on "usbimage" is "Tails" 0.198

And the system partition on "usbimage" is an EFI system partition 0.153

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.118

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.075

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.080

And the system partition on "usbimage" has the expected flags 0.094

Hooks

After features/support/hooks.rb:291 0.599

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:11.119	Passed

Feature Report