Cucumber Reports (no 3330) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3330	20 Mar 2024, 15:17

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	28:42.702	Passed

Tags: @product @not_release_blocker

26.092

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.253

And I temporarily create a 4 GiB disk named "gptfat" 0.047

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.211

And I plug USB drive "gptfat" 2.481

When I start Tails Installer 10.052

Then I am told by Tails Installer that the destination device "is too small" 0.046

Hooks

After features/support/hooks.rb:291 0.946

After features/support/hooks.rb:75 0.001

Tags: @product

19.917

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.349

And I temporarily create a 7200 MiB disk named "temp" 0.045

And I start Tails Installer 8.651

But a suitable USB device is not found 0.031

When I plug USB drive "temp" 2.559

Then the "temp" USB drive is selected 0.081

When I unplug USB drive "temp" 0.180

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:291 0.762

After features/support/hooks.rb:75 0.000

Tags: @product

4:27.992

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.026

And I temporarily create a 7200 MiB disk named "install" 0.081

And I create a gpt partition with a vfat filesystem on disk "install" 5.183

And I plug USB drive "install" 2.652

And I install Tails to USB drive "install" by cloning 3:58.672

Then the running Tails is installed on USB drive "install" 12.302

But there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:291 1.464

After features/support/hooks.rb:75 0.118

Tags: @product

4:12.700

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.236

And I temporarily create a 7200 MiB disk named "install" 0.047

And I plug USB drive "install" 2.595

And I install Tails to USB drive "install" by cloning 3:49.253

Then the running Tails is installed on USB drive "install" 12.506

But there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:291 1.380

After features/support/hooks.rb:75 0.116

Tags: @product

5:10.942

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 58.788

And I create a file in the Persistent directory 0.071

And I temporarily create a 7200 MiB disk named "install" 0.089

And I create a gpt partition with a vfat filesystem on disk "install" 4.545

And I plug USB drive "install" 3.068

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:42.800

Then the running Tails is installed on USB drive "install" 17.727

And there is a persistence partition on USB drive "install" 0.069

And the USB drive "install" contains the same files as my persistent storage 3.782

Hooks

After features/support/hooks.rb:291 2.178

After features/support/hooks.rb:75 0.167

Tags: @product

3:46.533

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.096

And I temporarily create a 7200 MiB disk named "install" 0.042

And I plug USB drive "install" 2.442

And I install Tails to USB drive "install" by cloning 3:19.089

Then the running Tails is installed on USB drive "install" 13.766

And there is no persistence partition on USB drive "install" 0.095

Hooks

After features/support/hooks.rb:291 1.901

After features/support/hooks.rb:75 0.133

Tags: @product

4:28.970

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.066

And I have started Tails from DVD without network and logged in 8.539

And I clone USB drive "__internal" to a temporary USB drive "install" 1.354

And I plug USB drive "install" 2.532

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:43.802

Then the running Tails is installed on USB drive "install" 23.615

And there is no persistence partition on USB drive "install" 0.059

Hooks

After features/support/hooks.rb:291 1.439

After features/support/hooks.rb:75 0.110

Tags: @product @uefi

1:51.917

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 16.982

And I power off the computer 0.367

And the computer is set to boot in UEFI mode 0.026

When I start Tails from USB drive "__internal" with network unplugged and I login 1:31.363

Then Tails is running from USB drive "__internal" 0.292

And the boot device has safe access rights 2.838

And Tails has started in UEFI mode 0.047

Hooks

After features/support/hooks.rb:291 1.209

After features/support/hooks.rb:75 0.006

Tags: @product

2:34.416

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 10.210

And I plug and mount a USB drive containing a Tails USB image 46.499

And I create a 7200 MiB disk named "usbimage" 0.094

And I plug USB drive "usbimage" 2.411

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:35.201

Hooks

After features/support/hooks.rb:291 3.243

After features/support/hooks.rb:75 0.094

Tags: @product

1:23.217

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.176

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:21.929

Then Tails is running from USB drive "usbimage" 0.322

And the label of the system partition on "usbimage" is "Tails" 0.221

And the system partition on "usbimage" is an EFI system partition 0.169

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.134

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.080

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.093

And the system partition on "usbimage" has the expected flags 0.090

Hooks

After features/support/hooks.rb:291 0.708

After features/support/hooks.rb:75 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	28:42.702	Passed

Feature Report