Cucumber Reports (no 3333) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3333	23 Mar 2024, 12:12

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:34.390	Passed

Tags: @product @not_release_blocker

25.011

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.836

And I temporarily create a 4 GiB disk named "gptfat" 0.045

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.046

And I plug USB drive "gptfat" 2.499

When I start Tails Installer 8.535

Then I am told by Tails Installer that the destination device "is too small" 0.047

Hooks

After features/support/hooks.rb:291 0.695

After features/support/hooks.rb:75 0.001

Tags: @product

19.809

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.056

And I temporarily create a 7200 MiB disk named "temp" 0.449

And I start Tails Installer 8.443

But a suitable USB device is not found 0.032

When I plug USB drive "temp" 2.478

Then the "temp" USB drive is selected 0.083

When I unplug USB drive "temp" 0.247

Then a suitable USB device is not found 0.018

Hooks

After features/support/hooks.rb:291 0.659

After features/support/hooks.rb:75 0.000

Tags: @product

3:45.385

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.251

And I temporarily create a 7200 MiB disk named "install" 0.042

And I create a gpt partition with a vfat filesystem on disk "install" 5.119

And I plug USB drive "install" 2.582

And I install Tails to USB drive "install" by cloning 3:17.114

Then the running Tails is installed on USB drive "install" 12.217

But there is no persistence partition on USB drive "install" 0.058

Hooks

After features/support/hooks.rb:291 1.468

After features/support/hooks.rb:75 0.116

Tags: @product

3:40.782

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.630

And I temporarily create a 7200 MiB disk named "install" 0.044

And I plug USB drive "install" 2.571

And I install Tails to USB drive "install" by cloning 3:16.564

Then the running Tails is installed on USB drive "install" 12.900

But there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:291 1.583

After features/support/hooks.rb:75 0.137

Tags: @product

4:19.693

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.697

And I create a file in the Persistent directory 0.128

And I temporarily create a 7200 MiB disk named "install" 0.053

And I create a gpt partition with a vfat filesystem on disk "install" 5.198

And I plug USB drive "install" 2.580

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:40.360

Then the running Tails is installed on USB drive "install" 13.681

And there is a persistence partition on USB drive "install" 0.070

And the USB drive "install" contains the same files as my persistent storage 2.922

Hooks

After features/support/hooks.rb:291 2.416

After features/support/hooks.rb:75 0.131

Tags: @product

3:49.451

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.451

And I temporarily create a 7200 MiB disk named "install" 0.046

And I plug USB drive "install" 2.469

And I install Tails to USB drive "install" by cloning 3:16.139

Then the running Tails is installed on USB drive "install" 18.234

And there is no persistence partition on USB drive "install" 0.109

Hooks

After features/support/hooks.rb:291 2.315

After features/support/hooks.rb:75 0.118

Tags: @product

3:53.191

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.570

And I have started Tails from DVD without network and logged in 8.520

And I clone USB drive "__internal" to a temporary USB drive "install" 1.315

And I plug USB drive "install" 3.045

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:18.065

Then the running Tails is installed on USB drive "install" 11.594

And there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:291 1.194

After features/support/hooks.rb:75 0.142

Tags: @product @uefi

1:44.861

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.560

And I power off the computer 0.340

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 1:28.387

Then Tails is running from USB drive "__internal" 0.325

And the boot device has safe access rights 4.163

And Tails has started in UEFI mode 0.054

Hooks

After features/support/hooks.rb:291 1.284

After features/support/hooks.rb:75 0.010

Tags: @product

2:12.787

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.005

Steps

Given I have started Tails from DVD without network and logged in 8.695

And I plug and mount a USB drive containing a Tails USB image 40.580

And I create a 7200 MiB disk named "usbimage" 0.070

And I plug USB drive "usbimage" 2.473

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:20.966

Hooks

After features/support/hooks.rb:291 2.511

After features/support/hooks.rb:75 0.089

Tags: @product

1:23.417

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.262

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:21.869

Then Tails is running from USB drive "usbimage" 0.373

And the label of the system partition on "usbimage" is "Tails" 0.243

And the system partition on "usbimage" is an EFI system partition 0.186

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.157

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.099

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.088

And the system partition on "usbimage" has the expected flags 0.136

Hooks

After features/support/hooks.rb:291 0.700

After features/support/hooks.rb:75 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:34.390	Passed

Feature Report