Cucumber Reports (no 3334) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3334	24 Mar 2024, 12:09

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:54.693	Passed

Tags: @product @not_release_blocker

24.329

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.284

And I temporarily create a 4 GiB disk named "gptfat" 0.057

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.142

And I plug USB drive "gptfat" 2.584

When I start Tails Installer 8.214

Then I am told by Tails Installer that the destination device "is too small" 0.046

Hooks

After features/support/hooks.rb:291 0.744

After features/support/hooks.rb:75 0.001

Tags: @product

19.791

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.227

And I temporarily create a 7200 MiB disk named "temp" 0.053

And I start Tails Installer 8.599

But a suitable USB device is not found 0.028

When I plug USB drive "temp" 2.524

Then the "temp" USB drive is selected 0.142

When I unplug USB drive "temp" 0.189

Then a suitable USB device is not found 0.026

Hooks

After features/support/hooks.rb:291 0.735

After features/support/hooks.rb:75 0.000

Tags: @product

3:43.896

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.125

And I temporarily create a 7200 MiB disk named "install" 0.064

And I create a gpt partition with a vfat filesystem on disk "install" 5.134

And I plug USB drive "install" 2.452

And I install Tails to USB drive "install" by cloning 3:18.169

Then the running Tails is installed on USB drive "install" 9.891

But there is no persistence partition on USB drive "install" 0.057

Hooks

After features/support/hooks.rb:291 1.399

After features/support/hooks.rb:75 0.121

Tags: @product

3:39.341

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.249

And I temporarily create a 7200 MiB disk named "install" 0.057

And I plug USB drive "install" 3.638

And I install Tails to USB drive "install" by cloning 3:17.192

Then the running Tails is installed on USB drive "install" 10.132

But there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:291 1.155

After features/support/hooks.rb:75 0.110

Tags: @product

4:17.240

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 12.847

And I create a file in the Persistent directory 0.100

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 5.176

And I plug USB drive "install" 2.478

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:40.017

Then the running Tails is installed on USB drive "install" 12.851

And there is a persistence partition on USB drive "install" 0.073

And the USB drive "install" contains the same files as my persistent storage 3.648

Hooks

After features/support/hooks.rb:291 2.221

After features/support/hooks.rb:75 0.123

Tags: @product

3:48.011

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.933

And I temporarily create a 7200 MiB disk named "install" 0.062

And I plug USB drive "install" 2.529

And I install Tails to USB drive "install" by cloning 3:19.638

Then the running Tails is installed on USB drive "install" 14.794

And there is no persistence partition on USB drive "install" 0.053

Hooks

After features/support/hooks.rb:291 1.613

After features/support/hooks.rb:75 0.096

Tags: @product

3:57.836

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.255

And I have started Tails from DVD without network and logged in 9.386

And I clone USB drive "__internal" to a temporary USB drive "install" 1.101

And I plug USB drive "install" 2.652

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:20.079

Then the running Tails is installed on USB drive "install" 14.296

And there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:291 1.537

After features/support/hooks.rb:75 0.144

Tags: @product @uefi

2:22.743

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.006

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 40.319

And I power off the computer 0.324

And the computer is set to boot in UEFI mode 0.031

When I start Tails from USB drive "__internal" with network unplugged and I login 1:38.913

Then Tails is running from USB drive "__internal" 0.291

And the boot device has safe access rights 2.813

And Tails has started in UEFI mode 0.049

Hooks

After features/support/hooks.rb:291 1.518

After features/support/hooks.rb:75 0.006

Tags: @product

1:58.280

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.969

And I plug and mount a USB drive containing a Tails USB image 33.938

And I create a 7200 MiB disk named "usbimage" 0.059

And I plug USB drive "usbimage" 2.423

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:12.889

Hooks

After features/support/hooks.rb:291 2.623

After features/support/hooks.rb:75 0.094

Tags: @product

1:23.222

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.210

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:21.799

Then Tails is running from USB drive "usbimage" 0.345

And the label of the system partition on "usbimage" is "Tails" 0.211

And the system partition on "usbimage" is an EFI system partition 0.192

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.182

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.088

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.113

And the system partition on "usbimage" has the expected flags 0.079

Hooks

After features/support/hooks.rb:291 0.677

After features/support/hooks.rb:75 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:54.693	Passed

Feature Report