Cucumber Reports (no 3351) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3351	16 Apr 2024, 15:45

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:50.077	Passed

Tags: @product @not_release_blocker

24.934

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.857

And I temporarily create a 4 GiB disk named "gptfat" 0.053

And I create a gpt partition with a vfat filesystem on disk "gptfat" 5.086

And I plug USB drive "gptfat" 2.527

When I start Tails Installer 8.361

Then I am told by Tails Installer that the destination device "is too small" 0.048

Hooks

After features/support/hooks.rb:291 1.358

After features/support/hooks.rb:75 0.001

Tags: @product

19.762

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.101

And I temporarily create a 7200 MiB disk named "temp" 0.047

And I start Tails Installer 8.657

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.548

Then the "temp" USB drive is selected 0.096

When I unplug USB drive "temp" 0.272

Then a suitable USB device is not found 0.017

Hooks

After features/support/hooks.rb:291 2.200

After features/support/hooks.rb:75 0.000

Tags: @product

3:56.084

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.257

And I temporarily create a 7200 MiB disk named "install" 0.053

And I create a gpt partition with a vfat filesystem on disk "install" 14.110

And I plug USB drive "install" 2.697

And I install Tails to USB drive "install" by cloning 3:19.687

Then the running Tails is installed on USB drive "install" 11.199

But there is no persistence partition on USB drive "install" 0.078

Hooks

After features/support/hooks.rb:291 1.165

After features/support/hooks.rb:75 0.112

Tags: @product

3:38.734

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.293

And I temporarily create a 7200 MiB disk named "install" 0.041

And I plug USB drive "install" 3.630

And I install Tails to USB drive "install" by cloning 3:16.098

Then the running Tails is installed on USB drive "install" 10.608

But there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.129

After features/support/hooks.rb:75 0.110

Tags: @product

4:25.132

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 20.876

And I create a file in the Persistent directory 0.077

And I temporarily create a 7200 MiB disk named "install" 0.064

And I create a gpt partition with a vfat filesystem on disk "install" 4.115

And I plug USB drive "install" 2.608

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:40.485

Then the running Tails is installed on USB drive "install" 12.803

And there is a persistence partition on USB drive "install" 0.074

And the USB drive "install" contains the same files as my persistent storage 4.026

Hooks

After features/support/hooks.rb:291 1.847

After features/support/hooks.rb:75 0.122

Tags: @product

3:44.951

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:245 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.380

And I temporarily create a 7200 MiB disk named "install" 0.049

And I plug USB drive "install" 2.437

And I install Tails to USB drive "install" by cloning 3:18.193

Then the running Tails is installed on USB drive "install" 13.821

And there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:291 1.309

After features/support/hooks.rb:75 0.093

Tags: @product

3:47.551

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:245 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.309

And I have started Tails from DVD without network and logged in 8.449

And I clone USB drive "__internal" to a temporary USB drive "install" 1.155

And I plug USB drive "install" 2.743

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:14.448

Then the running Tails is installed on USB drive "install" 11.380

And there is no persistence partition on USB drive "install" 0.063

Hooks

After features/support/hooks.rb:291 1.223

After features/support/hooks.rb:75 0.119

Tags: @product @uefi

1:43.503

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.827

And I power off the computer 0.318

And the computer is set to boot in UEFI mode 0.027

When I start Tails from USB drive "__internal" with network unplugged and I login 1:27.743

Then Tails is running from USB drive "__internal" 0.393

And the boot device has safe access rights 3.144

And Tails has started in UEFI mode 0.046

Hooks

After features/support/hooks.rb:291 1.084

After features/support/hooks.rb:75 0.008

Tags: @product

1:26.360

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:245 0.004

Steps

Given I have started Tails from DVD without network and logged in 8.933

And I plug and mount a USB drive containing a Tails USB image 32.143

And I create a 7200 MiB disk named "usbimage" 0.047

And I plug USB drive "usbimage" 2.435

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 42.800

Hooks

After features/support/hooks.rb:291 1.768

After features/support/hooks.rb:75 0.092

Tags: @product

1:23.062

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:245 0.003

Steps

Given a computer 0.177

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:21.710

Then Tails is running from USB drive "usbimage" 0.374

And the label of the system partition on "usbimage" is "Tails" 0.226

And the system partition on "usbimage" is an EFI system partition 0.155

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.169

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.080

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.075

And the system partition on "usbimage" has the expected flags 0.092

Hooks

After features/support/hooks.rb:291 1.144

After features/support/hooks.rb:75 0.022

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	24:50.077	Passed

Feature Report