Cucumber Reports (no 3371) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3371	02 May 2024, 13:52

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	30:24.240	Passed

Tags: @product @not_release_blocker

26.303

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.414

And I temporarily create a 4 GiB disk named "gptfat" 0.063

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.256

And I plug USB drive "gptfat" 2.533

When I start Tails Installer 8.985

Then I am told by Tails Installer that the destination device "is too small" 0.049

Hooks

After features/support/hooks.rb:305 1.325

After features/support/hooks.rb:89 0.001

Tags: @product

23.011

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.193

And I temporarily create a 7200 MiB disk named "temp" 0.057

And I start Tails Installer 10.183

But a suitable USB device is not found 0.101

When I plug USB drive "temp" 3.146

Then the "temp" USB drive is selected 0.095

When I unplug USB drive "temp" 0.207

Then a suitable USB device is not found 0.027

Hooks

After features/support/hooks.rb:305 0.753

After features/support/hooks.rb:89 0.000

Tags: @product

3:45.416

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.236

And I temporarily create a 7200 MiB disk named "install" 0.042

And I create a gpt partition with a vfat filesystem on disk "install" 6.356

And I plug USB drive "install" 2.525

And I install Tails to USB drive "install" by cloning 3:15.905

Then the running Tails is installed on USB drive "install" 12.267

But there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:305 1.551

After features/support/hooks.rb:89 0.116

Tags: @product

4:26.327

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.789

And I temporarily create a 7200 MiB disk named "install" 0.078

And I plug USB drive "install" 2.552

And I install Tails to USB drive "install" by cloning 4:0.965

Then the running Tails is installed on USB drive "install" 13.878

But there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:305 1.564

After features/support/hooks.rb:89 0.114

Tags: @product

5:17.701

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 39.043

And I create a file in the Persistent directory 0.080

And I temporarily create a 7200 MiB disk named "install" 0.345

And I create a gpt partition with a vfat filesystem on disk "install" 7.527

And I plug USB drive "install" 2.544

And I install Tails with Persistent Storage to USB drive "install" by cloning 4:5.717

Then the running Tails is installed on USB drive "install" 18.527

And there is a persistence partition on USB drive "install" 0.092

And the USB drive "install" contains the same files as my persistent storage 3.821

Hooks

After features/support/hooks.rb:305 2.366

After features/support/hooks.rb:89 0.126

Tags: @product

4:19.030

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 18.198

And I temporarily create a 7200 MiB disk named "install" 0.194

And I plug USB drive "install" 2.525

And I install Tails to USB drive "install" by cloning 3:22.189

Then the running Tails is installed on USB drive "install" 35.848

And there is no persistence partition on USB drive "install" 0.073

Hooks

After features/support/hooks.rb:305 1.685

After features/support/hooks.rb:89 0.094

Tags: @product

4:43.509

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.630

And I have started Tails from DVD without network and logged in 9.032

And I clone USB drive "__internal" to a temporary USB drive "install" 1.679

And I plug USB drive "install" 2.669

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:58.810

Then the running Tails is installed on USB drive "install" 19.619

And there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:305 1.408

After features/support/hooks.rb:89 0.129

Tags: @product @uefi

2:55.625

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 1:7.125

And I power off the computer 0.414

And the computer is set to boot in UEFI mode 0.054

When I start Tails from USB drive "__internal" with network unplugged and I login 1:44.340

Then Tails is running from USB drive "__internal" 0.384

And the boot device has safe access rights 3.250

And Tails has started in UEFI mode 0.055

Hooks

After features/support/hooks.rb:305 1.362

After features/support/hooks.rb:89 0.006

Tags: @product

2:40.635

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.387

And I plug and mount a USB drive containing a Tails USB image 42.586

And I create a 7200 MiB disk named "usbimage" 0.047

And I plug USB drive "usbimage" 2.388

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:47.225

Hooks

After features/support/hooks.rb:305 3.290

After features/support/hooks.rb:89 0.093

Tags: @product

1:26.679

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given a computer 0.146

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:25.182

Then Tails is running from USB drive "usbimage" 0.373

And the label of the system partition on "usbimage" is "Tails" 0.240

And the system partition on "usbimage" is an EFI system partition 0.165

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.184

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.164

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.112

And the system partition on "usbimage" has the expected flags 0.109

Hooks

After features/support/hooks.rb:305 0.812

After features/support/hooks.rb:89 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	30:24.240	Passed

Feature Report