Cucumber Reports (no 3381) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3381	09 May 2024, 12:31

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:12.208	Passed

Tags: @product @not_release_blocker

26.683

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.194

And I temporarily create a 4 GiB disk named "gptfat" 0.046

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.783

And I plug USB drive "gptfat" 2.564

When I start Tails Installer 9.041

Then I am told by Tails Installer that the destination device "is too small" 0.053

Hooks

After features/support/hooks.rb:305 0.855

After features/support/hooks.rb:89 0.001

Tags: @product

21.293

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.146

And I temporarily create a 7200 MiB disk named "temp" 0.048

And I start Tails Installer 9.932

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.817

Then the "temp" USB drive is selected 0.090

When I unplug USB drive "temp" 0.210

Then a suitable USB device is not found 0.024

Hooks

After features/support/hooks.rb:305 1.345

After features/support/hooks.rb:89 0.000

Tags: @product

3:51.595

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.006

Steps

Given I have started Tails from DVD without network and logged in 8.183

And I temporarily create a 7200 MiB disk named "install" 0.046

And I create a gpt partition with a vfat filesystem on disk "install" 6.455

And I plug USB drive "install" 2.553

And I install Tails to USB drive "install" by cloning 3:16.594

Then the running Tails is installed on USB drive "install" 17.684

But there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:305 1.295

After features/support/hooks.rb:89 0.128

Tags: @product

3:37.396

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.282

And I temporarily create a 7200 MiB disk named "install" 0.047

And I plug USB drive "install" 2.718

And I install Tails to USB drive "install" by cloning 3:14.537

Then the running Tails is installed on USB drive "install" 11.728

But there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:305 1.496

After features/support/hooks.rb:89 0.255

Tags: @product

4:24.362

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.011

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.723

And I create a file in the Persistent directory 0.071

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 6.462

And I plug USB drive "install" 2.533

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:41.413

Then the running Tails is installed on USB drive "install" 18.223

And there is a persistence partition on USB drive "install" 0.058

And the USB drive "install" contains the same files as my persistent storage 3.833

Hooks

After features/support/hooks.rb:305 2.785

After features/support/hooks.rb:89 0.124

Tags: @product

3:52.021

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.747

And I temporarily create a 7200 MiB disk named "install" 0.066

And I plug USB drive "install" 2.511

And I install Tails to USB drive "install" by cloning 3:20.248

Then the running Tails is installed on USB drive "install" 17.378

And there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:305 1.723

After features/support/hooks.rb:89 0.092

Tags: @product

3:51.164

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.427

And I have started Tails from DVD without network and logged in 8.904

And I clone USB drive "__internal" to a temporary USB drive "install" 1.311

And I plug USB drive "install" 2.554

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:15.777

Then the running Tails is installed on USB drive "install" 13.122

And there is no persistence partition on USB drive "install" 0.066

Hooks

After features/support/hooks.rb:305 1.146

After features/support/hooks.rb:89 0.124

Tags: @product @uefi

1:58.907

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 12.192

And I power off the computer 0.340

And the computer is set to boot in UEFI mode 0.026

When I start Tails from USB drive "__internal" with network unplugged and I login 1:42.930

Then Tails is running from USB drive "__internal" 0.368

And the boot device has safe access rights 3.005

And Tails has started in UEFI mode 0.044

Hooks

After features/support/hooks.rb:305 0.638

After features/support/hooks.rb:89 0.006

Tags: @product

2:21.022

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.229

And I plug and mount a USB drive containing a Tails USB image 52.810

And I create a 7200 MiB disk named "usbimage" 0.060

And I plug USB drive "usbimage" 2.408

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:17.512

Hooks

After features/support/hooks.rb:305 2.519

After features/support/hooks.rb:89 0.093

Tags: @product

1:27.759

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given a computer 0.245

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:26.343

Then Tails is running from USB drive "usbimage" 0.344

And the label of the system partition on "usbimage" is "Tails" 0.242

And the system partition on "usbimage" is an EFI system partition 0.152

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.163

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.077

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.097

And the system partition on "usbimage" has the expected flags 0.091

Hooks

After features/support/hooks.rb:305 0.647

After features/support/hooks.rb:89 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:12.208	Passed

Feature Report