Cucumber Reports (no 3382) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3382	09 May 2024, 15:18

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:35.412	Passed

Tags: @product @not_release_blocker

27.856

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.054

And I temporarily create a 4 GiB disk named "gptfat" 0.076

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.488

And I plug USB drive "gptfat" 3.601

When I start Tails Installer 8.595

Then I am told by Tails Installer that the destination device "is too small" 0.041

Hooks

After features/support/hooks.rb:305 0.767

After features/support/hooks.rb:89 0.001

Tags: @product

19.663

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.270

And I temporarily create a 7200 MiB disk named "temp" 0.213

And I start Tails Installer 8.337

But a suitable USB device is not found 0.019

When I plug USB drive "temp" 2.540

Then the "temp" USB drive is selected 0.078

When I unplug USB drive "temp" 0.176

Then a suitable USB device is not found 0.026

Hooks

After features/support/hooks.rb:305 0.866

After features/support/hooks.rb:89 0.000

Tags: @product

3:44.752

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.090

And I temporarily create a 7200 MiB disk named "install" 0.044

And I create a gpt partition with a vfat filesystem on disk "install" 6.492

And I plug USB drive "install" 2.604

And I install Tails to USB drive "install" by cloning 3:15.942

Then the running Tails is installed on USB drive "install" 11.513

But there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:305 1.219

After features/support/hooks.rb:89 0.116

Tags: @product

3:38.253

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.252

And I temporarily create a 7200 MiB disk named "install" 0.084

And I plug USB drive "install" 2.619

And I install Tails to USB drive "install" by cloning 3:15.527

Then the running Tails is installed on USB drive "install" 11.700

But there is no persistence partition on USB drive "install" 0.070

Hooks

After features/support/hooks.rb:305 1.683

After features/support/hooks.rb:89 0.114

Tags: @product

4:21.050

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.474

And I create a file in the Persistent directory 0.161

And I temporarily create a 7200 MiB disk named "install" 0.049

And I create a gpt partition with a vfat filesystem on disk "install" 6.423

And I plug USB drive "install" 2.900

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:42.305

Then the running Tails is installed on USB drive "install" 14.459

And there is a persistence partition on USB drive "install" 0.080

And the USB drive "install" contains the same files as my persistent storage 3.196

Hooks

After features/support/hooks.rb:305 1.695

After features/support/hooks.rb:89 0.141

Tags: @product

3:47.689

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.729

And I temporarily create a 7200 MiB disk named "install" 0.069

And I plug USB drive "install" 2.568

And I install Tails to USB drive "install" by cloning 3:16.361

Then the running Tails is installed on USB drive "install" 17.893

And there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:305 1.360

After features/support/hooks.rb:89 0.095

Tags: @product

3:50.674

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.486

And I have started Tails from DVD without network and logged in 8.518

And I clone USB drive "__internal" to a temporary USB drive "install" 1.069

And I plug USB drive "install" 2.594

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:15.794

Then the running Tails is installed on USB drive "install" 13.150

And there is no persistence partition on USB drive "install" 0.060

Hooks

After features/support/hooks.rb:305 1.221

After features/support/hooks.rb:89 0.123

Tags: @product @uefi

1:51.977

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.723

And I power off the computer 0.337

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 1:36.701

Then Tails is running from USB drive "__internal" 0.313

And the boot device has safe access rights 2.824

And Tails has started in UEFI mode 0.048

Hooks

After features/support/hooks.rb:305 0.584

After features/support/hooks.rb:89 0.005

Tags: @product

3:7.117

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.163

And I plug and mount a USB drive containing a Tails USB image 54.069

And I create a 7200 MiB disk named "usbimage" 0.072

And I plug USB drive "usbimage" 2.393

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 2:2.418

Hooks

After features/support/hooks.rb:305 2.842

After features/support/hooks.rb:89 0.096

Tags: @product

1:26.376

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given a computer 0.179

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:25.111

Then Tails is running from USB drive "usbimage" 0.303

And the label of the system partition on "usbimage" is "Tails" 0.219

And the system partition on "usbimage" is an EFI system partition 0.148

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.142

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.079

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.084

And the system partition on "usbimage" has the expected flags 0.106

Hooks

After features/support/hooks.rb:305 0.653

After features/support/hooks.rb:89 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:35.412	Passed

Feature Report