Cucumber Reports (no 3392) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3392	17 May 2024, 12:45

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:40.140	Passed

Tags: @product @not_release_blocker

26.601

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.126

And I temporarily create a 4 GiB disk named "gptfat" 0.043

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.229

And I plug USB drive "gptfat" 2.456

When I start Tails Installer 9.705

Then I am told by Tails Installer that the destination device "is too small" 0.039

Hooks

After features/support/hooks.rb:305 1.307

After features/support/hooks.rb:89 0.001

Tags: @product

20.704

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.459

And I temporarily create a 7200 MiB disk named "temp" 0.041

And I start Tails Installer 9.082

But a suitable USB device is not found 0.030

When I plug USB drive "temp" 2.784

Then the "temp" USB drive is selected 0.093

When I unplug USB drive "temp" 0.187

Then a suitable USB device is not found 0.025

Hooks

After features/support/hooks.rb:305 0.784

After features/support/hooks.rb:89 0.000

Tags: @product

3:57.137

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.114

And I temporarily create a 7200 MiB disk named "install" 0.615

And I create a gpt partition with a vfat filesystem on disk "install" 6.503

And I plug USB drive "install" 2.472

And I install Tails to USB drive "install" by cloning 3:27.140

Then the running Tails is installed on USB drive "install" 12.213

But there is no persistence partition on USB drive "install" 0.077

Hooks

After features/support/hooks.rb:305 1.306

After features/support/hooks.rb:89 0.114

Tags: @product

3:40.115

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.336

And I temporarily create a 7200 MiB disk named "install" 0.048

And I plug USB drive "install" 2.486

And I install Tails to USB drive "install" by cloning 3:17.069

Then the running Tails is installed on USB drive "install" 12.087

But there is no persistence partition on USB drive "install" 0.086

Hooks

After features/support/hooks.rb:305 0.971

After features/support/hooks.rb:89 0.113

Tags: @product

4:24.753

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.024

And I create a file in the Persistent directory 0.068

And I temporarily create a 7200 MiB disk named "install" 0.043

And I create a gpt partition with a vfat filesystem on disk "install" 6.360

And I plug USB drive "install" 2.526

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:40.257

Then the running Tails is installed on USB drive "install" 17.887

And there is a persistence partition on USB drive "install" 0.075

And the USB drive "install" contains the same files as my persistent storage 3.509

Hooks

After features/support/hooks.rb:305 2.142

After features/support/hooks.rb:89 0.122

Tags: @product

3:57.493

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.514

And I temporarily create a 7200 MiB disk named "install" 0.045

And I plug USB drive "install" 2.540

And I install Tails to USB drive "install" by cloning 3:16.404

Then the running Tails is installed on USB drive "install" 26.921

And there is no persistence partition on USB drive "install" 0.067

Hooks

After features/support/hooks.rb:305 2.038

After features/support/hooks.rb:89 0.093

Tags: @product

3:52.319

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.004

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.901

And I have started Tails from DVD without network and logged in 8.626

And I clone USB drive "__internal" to a temporary USB drive "install" 1.328

And I plug USB drive "install" 2.834

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:15.947

Then the running Tails is installed on USB drive "install" 13.604

And there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:305 1.455

After features/support/hooks.rb:89 0.123

Tags: @product @uefi

1:57.500

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.276

And I power off the computer 0.343

And the computer is set to boot in UEFI mode 0.047

When I start Tails from USB drive "__internal" with network unplugged and I login 1:42.631

Then Tails is running from USB drive "__internal" 0.356

And the boot device has safe access rights 2.790

And Tails has started in UEFI mode 0.053

Hooks

After features/support/hooks.rb:305 0.640

After features/support/hooks.rb:89 0.029

Tags: @product

1:37.708

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.052

And I plug and mount a USB drive containing a Tails USB image 40.254

And I create a 7200 MiB disk named "usbimage" 0.043

And I plug USB drive "usbimage" 2.427

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 46.930

Hooks

After features/support/hooks.rb:305 1.871

After features/support/hooks.rb:89 0.090

Tags: @product

1:25.805

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given a computer 0.156

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:24.442

Then Tails is running from USB drive "usbimage" 0.330

And the label of the system partition on "usbimage" is "Tails" 0.263

And the system partition on "usbimage" is an EFI system partition 0.158

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.177

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.114

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.078

And the system partition on "usbimage" has the expected flags 0.082

Hooks

After features/support/hooks.rb:305 0.756

After features/support/hooks.rb:89 0.008

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:40.140	Passed

Feature Report