Cucumber Reports (no 3402) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3402	28 May 2024, 13:59

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	30:27.745	Passed

Tags: @product @not_release_blocker

26.768

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.233

And I temporarily create a 4 GiB disk named "gptfat" 0.052

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.418

And I plug USB drive "gptfat" 2.471

When I start Tails Installer 8.529

Then I am told by Tails Installer that the destination device "is too small" 0.062

Hooks

After features/support/hooks.rb:305 0.861

After features/support/hooks.rb:89 0.001

Tags: @product

24.218

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 9.211

And I temporarily create a 7200 MiB disk named "temp" 0.044

And I start Tails Installer 10.647

But a suitable USB device is not found 0.028

When I plug USB drive "temp" 3.956

Then the "temp" USB drive is selected 0.099

When I unplug USB drive "temp" 0.207

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:305 0.923

After features/support/hooks.rb:89 0.000

Tags: @product

4:19.266

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.526

And I temporarily create a 7200 MiB disk named "install" 0.044

And I create a gpt partition with a vfat filesystem on disk "install" 6.436

And I plug USB drive "install" 2.448

And I install Tails to USB drive "install" by cloning 3:42.234

Then the running Tails is installed on USB drive "install" 19.492

But there is no persistence partition on USB drive "install" 0.084

Hooks

After features/support/hooks.rb:305 1.869

After features/support/hooks.rb:89 0.121

Tags: @product

4:11.747

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 10.796

And I temporarily create a 7200 MiB disk named "install" 0.659

And I plug USB drive "install" 2.867

And I install Tails to USB drive "install" by cloning 3:45.095

Then the running Tails is installed on USB drive "install" 12.254

But there is no persistence partition on USB drive "install" 0.072

Hooks

After features/support/hooks.rb:305 1.658

After features/support/hooks.rb:89 0.124

Tags: @product

5:22.720

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 47.369

And I create a file in the Persistent directory 0.110

And I temporarily create a 7200 MiB disk named "install" 0.088

And I create a gpt partition with a vfat filesystem on disk "install" 6.671

And I plug USB drive "install" 2.535

And I install Tails with Persistent Storage to USB drive "install" by cloning 4:1.002

Then the running Tails is installed on USB drive "install" 19.237

And there is a persistence partition on USB drive "install" 0.079

And the USB drive "install" contains the same files as my persistent storage 5.626

Hooks

After features/support/hooks.rb:305 2.857

After features/support/hooks.rb:89 0.125

Tags: @product

4:40.662

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 45.846

And I temporarily create a 7200 MiB disk named "install" 0.071

And I plug USB drive "install" 2.646

And I install Tails to USB drive "install" by cloning 3:24.079

Then the running Tails is installed on USB drive "install" 27.955

And there is no persistence partition on USB drive "install" 0.064

Hooks

After features/support/hooks.rb:305 2.630

After features/support/hooks.rb:89 0.093

Tags: @product

4:12.180

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.449

And I have started Tails from DVD without network and logged in 10.512

And I clone USB drive "__internal" to a temporary USB drive "install" 1.506

And I plug USB drive "install" 3.847

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:25.686

Then the running Tails is installed on USB drive "install" 17.077

And there is no persistence partition on USB drive "install" 0.099

Hooks

After features/support/hooks.rb:305 1.414

After features/support/hooks.rb:89 0.184

Tags: @product @uefi

2:19.603

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 35.966

And I power off the computer 0.413

And the computer is set to boot in UEFI mode 0.103

When I start Tails from USB drive "__internal" with network unplugged and I login 1:39.252

Then Tails is running from USB drive "__internal" 0.334

And the boot device has safe access rights 3.463

And Tails has started in UEFI mode 0.069

Hooks

After features/support/hooks.rb:305 1.889

After features/support/hooks.rb:89 0.006

Tags: @product

3:0.160

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 10.175

And I plug and mount a USB drive containing a Tails USB image 58.886

And I create a 7200 MiB disk named "usbimage" 0.145

And I plug USB drive "usbimage" 2.409

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:48.543

Hooks

After features/support/hooks.rb:305 3.333

After features/support/hooks.rb:89 0.091

Tags: @product

1:30.417

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given a computer 0.232

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:28.888

Then Tails is running from USB drive "usbimage" 0.410

And the label of the system partition on "usbimage" is "Tails" 0.272

And the system partition on "usbimage" is an EFI system partition 0.187

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.167

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.089

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.086

And the system partition on "usbimage" has the expected flags 0.083

Hooks

After features/support/hooks.rb:305 0.792

After features/support/hooks.rb:89 0.007

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	30:27.745	Passed

Feature Report