And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:44.934
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.385
And
I accept adding "cowsay" to Additional Software
6.567
And
Additional Software is correctly configured for package "cowsay"
0.849
And
I shutdown Tails and wait for the computer to power off
6.511
And
I start Tails from USB drive "__internal" with network unplugged
59.248
And
I enable persistence
11.805
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
42.652
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.494
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.065
And
available upgrades have been checked
2.320
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.124
And
I can open the Additional Software configuration window from the notification
3.617
And
I shutdown Tails and wait for the computer to power off
17.838
And
I start Tails from USB drive "__internal" with network unplugged
58.751
And
I enable persistence
13.178
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
37.460
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.182
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.127