And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.986
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.224
And
I accept adding "cowsay" to Additional Software
4.192
And
Additional Software is correctly configured for package "cowsay"
0.943
And
I shutdown Tails and wait for the computer to power off
6.675
And
I start Tails from USB drive "__internal" with network unplugged
1:1.053
And
I enable persistence
12.257
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
39.472
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.048
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.074
And
available upgrades have been checked
1.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.105
And
I can open the Additional Software configuration window from the notification
3.214
And
I shutdown Tails and wait for the computer to power off
2:8.121
And
I start Tails from USB drive "__internal" with network unplugged
1:0.287
And
I enable persistence
11.726
And
I configure APT to prefer an old version of cowsay
0.037
And
I log in to a new session
41.539
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.713
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.118