And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.781
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.029
And
I accept adding "cowsay" to Additional Software
4.212
And
Additional Software is correctly configured for package "cowsay"
0.984
And
I shutdown Tails and wait for the computer to power off
4.406
And
I start Tails from USB drive "__internal" with network unplugged
59.105
And
I enable persistence
11.778
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.110
And
I log in to a new session
39.934
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.548
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.072
And
available upgrades have been checked
0.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.179
And
I can open the Additional Software configuration window from the notification
3.981
And
I shutdown Tails and wait for the computer to power off
12.824
And
I start Tails from USB drive "__internal" with network unplugged
1:1.146
And
I enable persistence
12.868
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
38.220
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.723
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.085
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092