And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:31.938
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.085
And
I accept adding "cowsay" to Additional Software
4.661
And
Additional Software is correctly configured for package "cowsay"
0.973
And
I shutdown Tails and wait for the computer to power off
4.398
And
I start Tails from USB drive "__internal" with network unplugged
1:3.325
And
I enable persistence
13.037
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.117
And
I log in to a new session
40.777
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.426
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.067
And
available upgrades have been checked
0.065
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.211
And
I can open the Additional Software configuration window from the notification
4.411
And
I shutdown Tails and wait for the computer to power off
2:3.428
And
I start Tails from USB drive "__internal" with network unplugged
1:2.479
And
I enable persistence
15.002
And
I configure APT to prefer an old version of cowsay
0.048
And
I log in to a new session
47.952
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.019
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.091
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.214
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.106