And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.820
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.884
And
I accept adding "cowsay" to Additional Software
5.593
And
Additional Software is correctly configured for package "cowsay"
0.953
And
I shutdown Tails and wait for the computer to power off
6.753
And
I start Tails from USB drive "__internal" with network unplugged
59.512
And
I enable persistence
21.171
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
41.092
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.410
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
I prepare the Additional Software upgrade process to fail
0.086
And
the network is plugged
0.080
And
available upgrades have been checked
0.115
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.765
And
I can open the Additional Software configuration window from the notification
3.725
And
I shutdown Tails and wait for the computer to power off
19.777
And
I start Tails from USB drive "__internal" with network unplugged
1:1.818
And
I enable persistence
12.303
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
39.663
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.433
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
the network is plugged
0.093
Then
the Additional Software upgrade service has started
1.317
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.154