And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.895
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.490
And
I accept adding "cowsay" to Additional Software
7.436
And
Additional Software is correctly configured for package "cowsay"
0.844
And
I shutdown Tails and wait for the computer to power off
6.296
And
I start Tails from USB drive "__internal" with network unplugged
57.592
And
I enable persistence
12.205
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
43.863
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.806
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.120
And
the network is plugged
0.063
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.829
And
I can open the Additional Software configuration window from the notification
2.820
And
I shutdown Tails and wait for the computer to power off
17.875
And
I start Tails from USB drive "__internal" with network unplugged
57.076
And
I enable persistence
12.028
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
43.376
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.798
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.155
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081