Project Number Date
test_Tails_ISO_devel 3608 10 Dec 2024, 13:11

Failures Overview

The following summary displays scenarios that failed.

Feature: Installing Tails to a USB drive
Tags: @product
21:28.684
Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied
Before features/support/hooks.rb:269 0.003
Steps
Given a computer 0.332
And I start Tails from USB drive "usbimage" with network unplugged and I login 21:28.352
execution 
execution expired (RemoteShell::Timeout)
./features/support/helpers/remote_shell.rb:56:in `read'
./features/support/helpers/remote_shell.rb:56:in `block (3 levels) in communicate'
./features/support/helpers/remote_shell.rb:55:in `block (2 levels) in communicate'
./features/support/helpers/remote_shell.rb:42:in `loop'
./features/support/helpers/remote_shell.rb:42:in `block in communicate'
./features/support/helpers/remote_shell.rb:37:in `communicate'
./features/support/helpers/remote_shell.rb:174:in `execute'
./features/support/helpers/remote_shell.rb:185:in `initialize'
./features/support/helpers/dogtail.rb:80:in `new'
./features/support/helpers/dogtail.rb:80:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/common_steps.rb:712:in `new'
./features/step_definitions/common_steps.rb:712:in `/^all notifications have disappeared$/'
./features/step_definitions/common_steps.rb:298:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:100:in `And I start Tails from USB drive "usbimage" with network unplugged and I login'
Then Tails is running from USB drive "usbimage" 0.000
And the label of the system partition on "usbimage" is "Tails" 0.000
And the system partition on "usbimage" is an EFI system partition 0.000
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.000
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.000
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.000
And the system partition on "usbimage" has the expected flags 0.000
After features/support/hooks.rb:326 10.978 
SCENARIO FAILED: 'The system partition is updated when booting from a USB drive where a Tails USB image was copied' (at time 01:20:26)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3608/artifact/build-artifacts/01:20:26_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3608/artifact/build-artifacts/01:20:26_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3608/artifact/build-artifacts/01:20:26_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.journal
After features/support/hooks.rb:100 0.006
Feature: Upgrading an old Tails USB installation
Tags: @product
22:2.767
Scenario Writing files to a read/write-enabled persistent partition with the old Tails USB installation
Before features/support/hooks.rb:269 0.006
Steps
Given a computer 0.196
And I start Tails from USB drive "old" with network unplugged and I login with persistence enabled 22:2.570
execution 
execution expired (RemoteShell::Timeout)
./features/support/helpers/remote_shell.rb:56:in `read'
./features/support/helpers/remote_shell.rb:56:in `block (3 levels) in communicate'
./features/support/helpers/remote_shell.rb:55:in `block (2 levels) in communicate'
./features/support/helpers/remote_shell.rb:42:in `loop'
./features/support/helpers/remote_shell.rb:42:in `block in communicate'
./features/support/helpers/remote_shell.rb:37:in `communicate'
./features/support/helpers/remote_shell.rb:174:in `execute'
./features/support/helpers/remote_shell.rb:185:in `initialize'
./features/support/helpers/dogtail.rb:80:in `new'
./features/support/helpers/dogtail.rb:80:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/common_steps.rb:712:in `new'
./features/step_definitions/common_steps.rb:712:in `/^all notifications have disappeared$/'
./features/step_definitions/common_steps.rb:298:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_upgrade.feature:46:in `And I start Tails from USB drive "old" with network unplugged and I login with persistence enabled'
Then Tails is running from USB drive "old" 0.000
And all tps features are active 0.000
When I write some files expected to persist 0.000
# Verify that our baseline for the next scenarios is sane
And all persistent filesystems have safe access rights 0.000
And all persistence configuration files have safe access rights 0.000
And all persistent directories from the old Tails version have safe access rights 0.000
And I take note of which tps features are available 0.000
And I shutdown Tails and wait for the computer to power off 0.000
# XXX: how does guestfs work vs snapshots?
Then only the expected files are present on the persistence partition on USB drive "old" 0.000
After features/support/hooks.rb:326 10.835 
SCENARIO FAILED: 'Writing files to a read/write-enabled persistent partition with the old Tails USB installation' (at time 02:21:36)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3608/artifact/build-artifacts/02:21:36_Writing_files_to_a_read_write-enabled_persistent_partition_with_the_old_Tails_USB_installation.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3608/artifact/build-artifacts/02:21:36_Writing_files_to_a_read_write-enabled_persistent_partition_with_the_old_Tails_USB_installation.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3608/artifact/build-artifacts/02:21:36_Writing_files_to_a_read_write-enabled_persistent_partition_with_the_old_Tails_USB_installation.journal
After features/support/hooks.rb:100 0.008
Feature: Upgrading an old Tails USB installation
Tags: @product
2:13.720
Scenario Booting Tails from a USB drive upgraded from USB with persistence enabled
Before features/support/hooks.rb:269 0.005
Steps
Given a computer 0.234
And I start Tails from USB drive "to_upgrade" with network unplugged and I login with persistence enabled 2:7.917
Then all tps features from the old Tails version are active 1.624
And Tails is running from USB drive "to_upgrade" 0.338
And the boot device has safe access rights 3.550
And the expected persistent files created with the old Tails version are present in the filesystem 0.054
Could 
Could not find expected file in persistent directory /home/amnesia/Persistent.
<false> is not true. (Test::Unit::AssertionFailedError)
./features/support/helpers/misc_helpers.rb:21:in `assert_vmcommand_success'
./features/step_definitions/usb.rb:1094:in `block (2 levels) in <top (required)>'
./features/step_definitions/usb.rb:1093:in `each'
./features/step_definitions/usb.rb:1093:in `/^the expected persistent files(| created with the old Tails version) are present in the filesystem$/'
features/usb_upgrade.feature:77:in `And the expected persistent files created with the old Tails version are present in the filesystem'
And all persistent directories from the old Tails version have safe access rights 0.000
After features/support/hooks.rb:326 5.150 
SCENARIO FAILED: 'Booting Tails from a USB drive upgraded from USB with persistence enabled' (at time 02:26:40)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3608/artifact/build-artifacts/02:26:40_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3608/artifact/build-artifacts/02:26:40_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3608/artifact/build-artifacts/02:26:40_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_devel/3608/artifact/build-artifacts/02:26:40_Booting_Tails_from_a_USB_drive_upgraded_from_USB_with_persistence_enabled.journal
After features/support/hooks.rb:100 0.010