And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.563
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.934
And
I accept adding "cowsay" to Additional Software
6.607
And
Additional Software is correctly configured for package "cowsay"
0.916
And
I shutdown Tails and wait for the computer to power off
6.303
And
I start Tails from USB drive "__internal" with network unplugged
59.640
And
I enable persistence
14.168
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
40.424
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.837
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.076
And
available upgrades have been checked
0.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.789
And
I can open the Additional Software configuration window from the notification
2.481
And
I shutdown Tails and wait for the computer to power off
13.340
And
I start Tails from USB drive "__internal" with network unplugged
59.894
And
I enable persistence
12.671
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
42.158
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.668
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.155
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100