And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.965
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.534
And
I accept adding "cowsay" to Additional Software
6.594
And
Additional Software is correctly configured for package "cowsay"
0.900
And
I shutdown Tails and wait for the computer to power off
6.404
And
I start Tails from USB drive "__internal" with network unplugged
58.518
And
I enable persistence
10.427
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
38.747
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.474
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.079
And
available upgrades have been checked
0.078
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.369
And
I can open the Additional Software configuration window from the notification
2.616
And
I shutdown Tails and wait for the computer to power off
18.207
And
I start Tails from USB drive "__internal" with network unplugged
58.237
And
I enable persistence
12.158
And
I configure APT to prefer an old version of cowsay
0.041
And
I log in to a new session
38.173
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.006
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.103
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098