And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.136
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.805
And
I accept adding "cowsay" to Additional Software
6.591
And
Additional Software is correctly configured for package "cowsay"
0.814
And
I shutdown Tails and wait for the computer to power off
6.427
And
I start Tails from USB drive "__internal" with network unplugged
57.821
And
I enable persistence
11.407
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
36.274
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.489
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.079
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.871
And
I can open the Additional Software configuration window from the notification
3.234
And
I shutdown Tails and wait for the computer to power off
12.949
And
I start Tails from USB drive "__internal" with network unplugged
1:0.802
And
I enable persistence
12.385
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
40.907
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.488
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.172
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075