And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.461
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.739
And
I accept adding "cowsay" to Additional Software
7.340
And
Additional Software is correctly configured for package "cowsay"
0.846
And
I shutdown Tails and wait for the computer to power off
6.368
And
I start Tails from USB drive "__internal" with network unplugged
1:5.770
And
I enable persistence
12.681
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
37.917
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.076
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.060
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.485
And
I can open the Additional Software configuration window from the notification
2.850
And
I shutdown Tails and wait for the computer to power off
2:2.174
And
I start Tails from USB drive "__internal" with network unplugged
57.816
And
I enable persistence
11.721
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
36.899
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.142
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.268
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100