And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.685
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.446
And
I accept adding "cowsay" to Additional Software
6.465
And
Additional Software is correctly configured for package "cowsay"
0.903
And
I shutdown Tails and wait for the computer to power off
6.316
And
I start Tails from USB drive "__internal" with network unplugged
58.508
And
I enable persistence
12.152
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
40.210
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.385
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.082
And
available upgrades have been checked
0.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.143
And
I can open the Additional Software configuration window from the notification
3.092
And
I shutdown Tails and wait for the computer to power off
13.260
And
I start Tails from USB drive "__internal" with network unplugged
58.320
And
I enable persistence
12.156
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
37.792
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.766
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.176
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097