And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.398
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
28.007
And
I accept adding "cowsay" to Additional Software
5.326
And
Additional Software is correctly configured for package "cowsay"
0.863
And
I shutdown Tails and wait for the computer to power off
4.434
And
I start Tails from USB drive "__internal" with network unplugged
57.620
And
I enable persistence
12.533
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.076
And
I log in to a new session
42.495
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.341
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.076
And
available upgrades have been checked
1.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.273
And
I can open the Additional Software configuration window from the notification
2.525
And
I shutdown Tails and wait for the computer to power off
13.295
And
I start Tails from USB drive "__internal" with network unplugged
58.811
And
I enable persistence
12.810
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
37.048
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.094
Then
the Additional Software upgrade service has started
0.155
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089