And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.669
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.433
And
I accept adding "cowsay" to Additional Software
5.713
And
Additional Software is correctly configured for package "cowsay"
0.857
And
I shutdown Tails and wait for the computer to power off
6.450
And
I start Tails from USB drive "__internal" with network unplugged
58.363
And
I enable persistence
11.144
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
39.137
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.248
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.091
And
available upgrades have been checked
0.185
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.292
And
I can open the Additional Software configuration window from the notification
3.023
And
I shutdown Tails and wait for the computer to power off
13.436
And
I start Tails from USB drive "__internal" with network unplugged
59.553
And
I enable persistence
12.624
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
42.506
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.939
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089