And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.938
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.980
And
I accept adding "cowsay" to Additional Software
7.630
And
Additional Software is correctly configured for package "cowsay"
0.839
And
I shutdown Tails and wait for the computer to power off
6.326
And
I start Tails from USB drive "__internal" with network unplugged
59.620
And
I enable persistence
15.524
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
37.529
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.864
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.080
And
available upgrades have been checked
0.138
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.831
And
I can open the Additional Software configuration window from the notification
3.222
And
I shutdown Tails and wait for the computer to power off
13.222
And
I start Tails from USB drive "__internal" with network unplugged
58.896
And
I enable persistence
12.563
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
35.282
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.398
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.198
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072