And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.831
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.493
And
I accept adding "cowsay" to Additional Software
4.650
And
Additional Software is correctly configured for package "cowsay"
0.926
And
I shutdown Tails and wait for the computer to power off
4.490
And
I start Tails from USB drive "__internal" with network unplugged
1:1.590
And
I enable persistence
14.024
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.100
And
I log in to a new session
38.891
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.128
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.084
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.834
And
I can open the Additional Software configuration window from the notification
2.538
And
I shutdown Tails and wait for the computer to power off
2:7.535
And
I start Tails from USB drive "__internal" with network unplugged
1:3.179
And
I enable persistence
13.887
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
42.952
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.124
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.099
Then
the Additional Software upgrade service has started
0.185
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.149