And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.075
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.880
And
I accept adding "cowsay" to Additional Software
6.612
And
Additional Software is correctly configured for package "cowsay"
0.962
And
I shutdown Tails and wait for the computer to power off
4.328
And
I start Tails from USB drive "__internal" with network unplugged
1:0.654
And
I enable persistence
13.368
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
41.012
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.888
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.081
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.303
And
I can open the Additional Software configuration window from the notification
2.356
And
I shutdown Tails and wait for the computer to power off
13.247
And
I start Tails from USB drive "__internal" with network unplugged
59.702
And
I enable persistence
11.336
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
37.856
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.913
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.206
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.116