And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.153
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.771
And
I accept adding "cowsay" to Additional Software
6.898
And
Additional Software is correctly configured for package "cowsay"
0.827
And
I shutdown Tails and wait for the computer to power off
6.632
And
I start Tails from USB drive "__internal" with network unplugged
1:1.203
And
I enable persistence
14.226
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
44.726
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.426
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.100
And
the network is plugged
0.095
And
available upgrades have been checked
0.075
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.424
And
I can open the Additional Software configuration window from the notification
3.168
And
I shutdown Tails and wait for the computer to power off
2:2.271
And
I start Tails from USB drive "__internal" with network unplugged
1:2.697
And
I enable persistence
13.893
And
I configure APT to prefer an old version of cowsay
0.042
And
I log in to a new session
40.459
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.412
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.087
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.128