And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:24.176
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.694
And
I accept adding "cowsay" to Additional Software
5.291
And
Additional Software is correctly configured for package "cowsay"
0.879
And
I shutdown Tails and wait for the computer to power off
6.410
And
I start Tails from USB drive "__internal" with network unplugged
59.361
And
I enable persistence
11.829
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
40.054
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.300
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.087
And
available upgrades have been checked
2.423
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.357
And
I can open the Additional Software configuration window from the notification
3.135
And
I shutdown Tails and wait for the computer to power off
17.823
And
I start Tails from USB drive "__internal" with network unplugged
1:7.103
And
I enable persistence
11.302
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
40.831
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.738
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.101
Then
the Additional Software upgrade service has started
0.155
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088