And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.554
And
I configure APT to prefer an old version of cowsay
0.040
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.713
And
I accept adding "cowsay" to Additional Software
3.197
And
Additional Software is correctly configured for package "cowsay"
0.989
And
I shutdown Tails and wait for the computer to power off
6.626
And
I start Tails from USB drive "__internal" with network unplugged
1:3.446
And
I enable persistence
13.066
And
I configure APT to prefer an old version of cowsay
0.039
And
I disable the tails-virt-notify-user.service user unit
0.105
And
I log in to a new session
42.527
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.855
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.073
And
available upgrades have been checked
1.173
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.991
And
I can open the Additional Software configuration window from the notification
2.662
And
I shutdown Tails and wait for the computer to power off
2:2.575
And
I start Tails from USB drive "__internal" with network unplugged
1:2.665
And
I enable persistence
12.559
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
46.390
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.286
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085