And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.134
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.341
And
I accept adding "cowsay" to Additional Software
6.966
And
Additional Software is correctly configured for package "cowsay"
0.925
And
I shutdown Tails and wait for the computer to power off
4.507
And
I start Tails from USB drive "__internal" with network unplugged
1:1.410
And
I enable persistence
13.118
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.094
And
I log in to a new session
38.554
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.150
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.064
And
available upgrades have been checked
0.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.143
And
I can open the Additional Software configuration window from the notification
3.187
And
I shutdown Tails and wait for the computer to power off
2:2.155
And
I start Tails from USB drive "__internal" with network unplugged
1:7.412
And
I enable persistence
11.518
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
38.427
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.402
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095