And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:36.926
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.315
And
I accept adding "cowsay" to Additional Software
4.718
And
Additional Software is correctly configured for package "cowsay"
1.014
And
I shutdown Tails and wait for the computer to power off
6.772
And
I start Tails from USB drive "__internal" with network unplugged
1:11.620
And
I enable persistence
18.963
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.099
And
I log in to a new session
40.208
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.116
And
available upgrades have been checked
0.073
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.730
And
I can open the Additional Software configuration window from the notification
3.599
And
I shutdown Tails and wait for the computer to power off
2:8.193
And
I start Tails from USB drive "__internal" with network unplugged
1:9.524
And
I enable persistence
20.039
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
41.005
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.474
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.087
Then
the Additional Software upgrade service has started
0.185
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.118