And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:37.151
And
I configure APT to prefer an old version of cowsay
0.043
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.301
And
I accept adding "cowsay" to Additional Software
7.232
And
Additional Software is correctly configured for package "cowsay"
1.087
And
I shutdown Tails and wait for the computer to power off
6.371
And
I start Tails from USB drive "__internal" with network unplugged
1:5.310
And
I enable persistence
13.946
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
46.034
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.345
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.085
And
available upgrades have been checked
0.073
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.808
And
I can open the Additional Software configuration window from the notification
2.899
And
I shutdown Tails and wait for the computer to power off
2:8.445
And
I start Tails from USB drive "__internal" with network unplugged
1:3.830
And
I enable persistence
13.904
And
I configure APT to prefer an old version of cowsay
0.037
And
I log in to a new session
48.204
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.505
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.094
Then
the Additional Software upgrade service has started
0.197
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100