And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:12.592
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
37.519
And
I accept adding "cowsay" to Additional Software
4.958
And
Additional Software is correctly configured for package "cowsay"
1.102
And
I shutdown Tails and wait for the computer to power off
10.483
And
I start Tails from USB drive "__internal" with network unplugged
1:23.368
And
I enable persistence
16.860
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
43.662
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
45.050
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.090
And
the network is plugged
0.075
And
available upgrades have been checked
0.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.619
And
I can open the Additional Software configuration window from the notification
2.557
And
I shutdown Tails and wait for the computer to power off
19.055
And
I start Tails from USB drive "__internal" with network unplugged
1:19.823
And
I enable persistence
17.375
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
46.563
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
46.296
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.092
Then
the Additional Software upgrade service has started
0.392
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.315