And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:21.210
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
39.848
And
I accept adding "cowsay" to Additional Software
8.510
And
Additional Software is correctly configured for package "cowsay"
1.991
And
I shutdown Tails and wait for the computer to power off
6.242
And
I start Tails from USB drive "__internal" with network unplugged
1:21.355
And
I enable persistence
21.578
And
I configure APT to prefer an old version of cowsay
0.049
And
I disable the tails-virt-notify-user.service user unit
0.124
And
I log in to a new session
58.624
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
54.646
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.206
And
I prepare the Additional Software upgrade process to fail
0.206
And
the network is plugged
0.176
And
available upgrades have been checked
0.343
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.291
And
I can open the Additional Software configuration window from the notification
4.044
And
I shutdown Tails and wait for the computer to power off
15.153
And
I start Tails from USB drive "__internal" with network unplugged
1:26.710
And
I enable persistence
31.256
And
I configure APT to prefer an old version of cowsay
0.037
And
I log in to a new session
1:8.219
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
37.785
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.077
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
0.440
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.343